PPA MASTERBATCH

POLYMER PROCESSING ADDITIVE MASTERBATCH – PT3001

INTRODUCTION

Polyfill Natural Polymer Processing Aid Masterbatch, PT3001 is a new generation, highly technical product, suitable for controlling and eliminating the problem of Melt Fracture or Shark Skin Effect, during the process of LLDPE / LDPE / HM – HDPE by extrusion process.

Melt Fracture is generally the surface imperfection seen as a regular ridged surface with ridges running perpendicular to the extrusion direction especially in films, which is also known as Shark Skin Effect. 

FEATURES       Thus, PT3001,

1. Broadens extrusion processing capabilities of polyolefin resins.
2. Reduces or eliminates Die built up.
3. Lowers apparent Melt Viscosity.
4. Ideal for use in low MFI LLDPE, HDPE & high molecular weight HDPE resins.
5. For use at low levels.
6. Can offer performance & cost advantages.
7. Imparts a smooth, glossy and even surface to the extrudated / film.
8. Allows the process film with narrow die gap which results in balance of bi-directional properties and hence, more uniformity in film thickness and coating guage.
9. Reduces the wear and tear of the melt line, as a result increases the life of the processing equipment.
10. Reduces the chance of degradation of polymer and colours as it lowers the resistance time of melt through faster plastication.
11. Lowers the processing temperature, hence reduces electrical energy consumption by 5-15%.
12. Reduces the melt COF and hence there is an increase in output rate by about 10-15%.                                                      

DOSAGE            

PT3001 Masterbatch is to be mixed with polymers in a dosage of 0.5 – 2% for LLDPEAND HDPE. Generally the 0.5% use of this Masterbatch gives a good result for processing film.

PACKING

PT3001 is available in 25 kg pack. This material is packed in PE lined heavy duty moisture proof on HDPE woven bag.