24V DC power supply voltage rises from. In addition, the on-off control of the injector coil switch must have a high-speed response characteristics of the system used in the N-channel power devices IXYS IXFH58N20 as a power -driven actuator , open the device's response time <50 ns, which shut off time <200 ns. Experiments, particularly the nozzle hole machining , wherein the aperture of the nozzle holes 0.18 mm, pore pressure measurement holes is 1.5 mm ( with a pressure sensor for determining the pore size with good ) . Spray orifice and pressure measurement holes are punched using EDM machining mode . In order to adverse effects in the process of the formation of burrs and iron needle movement and resulting fuel flow to maximize the elimination , into the hole after the machining of the parts of the fine processing , and to the nozzle channel of a comprehensive thorough high pressure water cleaning. As can be seen , the internal pressure measurement points hair very close to the nozzle spray orifice upstream pressure chamber (sac chamber) In addition , the control signal electronically controlled fuel injection , turbocharger solenoid valve timing card PS2401 controlled by software in Intel 8253 timer generates , through the generic Array Logic GAL20V8 logic synthesis.

Ordering information of 1/2GD full cone spray nozzle(YBS Brand)

Materials:None=brass                                   I=mild steel                   SS=303stainless steel

1/2 1/2GGD-16                                 1/2GGD-I16             1/2GGD-SS16

1/2GGD-25                                 1/2GGD-I25      1/2GGD-SS25

24V DC power supply voltage rises from. In addition, the on-off control of the injector coil switch must have a high-speed response characteristics of the system used in the N-channel power devices IXYS IXFH58N20 as a power -driven actuator , open the device's response time <50 ns, which shut off time <200 ns. Experiments, particularly the nozzle hole machining , wherein the aperture of the nozzle holes 0.18 mm, pore pressure measurement holes is 1.5 mm ( with a pressure sensor for determining the pore size with good ) . Spray orifice and pressure measurement holes are punched using EDM machining mode . In order to adverse effects in the process of the formation of burrs and iron needle movement and resulting fuel flow to maximize the elimination , into the hole after the machining of the parts of the fine processing , and to the nozzle channel of a comprehensive thorough high pressure water cleaning. As can be seen , the internal pressure measurement points hair very close to the nozzle spray orifice upstream pressure chamber (sac chamber) In addition , the control signal electronically controlled fuel injection , turbocharger solenoid valve timing card PS2401 controlled by software in Intel 8253 timer generates , through the generic Array Logic GAL20V8 logic synthesis.

Ordering information of 1/2GD full cone spray nozzle(YBS Brand)

Materials:None=brass                                   I=mild steel                   SS=303stainless steel

1/2 1/2GGD-16                                 1/2GGD-I16             1/2GGD-SS16

1/2GGD-25                                 1/2GGD-I25      1/2GGD-SS25