Home Guard

│Description│

This application scope shall apply to slightly acidic hypochlorous acid solution that is, sterilizing water producing unit.
This product is a device that flowing of tap water and electrolyte(Refined salt for food additives and organic acids) into the electrode module, and making a slightly acidic hypochlorous acid solution from through the electrolysis operation.

In order to partake of a (5 ~ 6.5 pH) slightly acidic nature, this device produces sterile water with a secure and strong sterilizing power.
Be used at sterilization, disinfection, cleaning and the deodorizing process of the food, such as fruits and other vegetables.

Produced slightly acid hypochlorous acid solution is, environmentally friendly, and has been authenticated as a food additive by FDA, Ministry of Health and Welfare of Japan and KFDA, so it has convenience does not require the use of diluted separately.

│Specification│

│How to use│

1. Attach power cord to transformer. Then insert end of transformer cord into base station.
   Plug polarized power cord into standard polarized 120v outlet only.
   
   
2. To test that base station works, turn unit “on” by pressing the vertical power bar on
   front of base station.
   
   
3. When “on”, LED light (centered inside base station) will illuminate “blue”. When generator
   bottle properly filled with correct amounts of tap water and catalyst mixture, place
   generator bottle correctly in base and press power bar “on” to begin short generating process.
   
   
4. Add 13.5 oz. (400ml) clean tap water up to fill line of water container.
   Avoid using dirty or excessively hard water.
   
   
5. Using enclosed measuring scoop, add only 1 level scoop (0.5 gram) of catalyst mixture to water.
   
   
6. Securely screw on lid.
   
   
7. Cover opening on top of lid with hand and shake well.
   
   
8. Insert spray trigger into top of lid and place tube into middle of generating apparatus at bottom. Securely screw on spray trigger.
   
   
9. Correctly place container into base station positioning flattened side of container next to power bar side of base station.
   
   
10. To start generating process, press power bar “on”. Unit illuminates to produce steady stream of bubbles and water appears cloudy. Process takes about 5 minutes and ends when unit stops flashing. Then spray wherever sanitizing-disinfecting is needed.