Description

Cute, pretty, thin, and elegant design,

thermal insulation effect is obvious wallpaper.

Wallpaper to finish the film and reduced the hassle of construction was

a multi-layered structure to prevent the propagation of mold

and condensation from insulation effect is enhanced products.

Our products reduce the temperature difference between outdoor

and indoor mold and prevent the condensation from the root.

The compressed layers of nonwoven fabric material is caused

by changes in temperature inside and outside the nonwoven fabric from

absorbing the condensation cycle is due.

Our mold insulation, hold the damn wallpaper. 

In addition, the heat reflective capabilities have warm in winter

and cool in the summer heat and fuel consumption by reducing costs.



If you have an

existing wallpaper

1. Existing wallpaper (paper, laminated wallpaper) is still attached

without lifting off phenomenon mode

- After cleaning, wipe completely dry construction products

2. In mold wall construction is

- Bleach mold or mildew remover

and then wipe completely dry construction products



※ Wall paint, cement wall, the Premier (Wall Waterproof Coating) to paint

with a brush or roller to paint as if, thinly painted on the front of a cement

wall and then dried over an hour, fully insulated wall paper construction.

Notes

1. On the cement wall and paint the wall insulation binder,

if you apply the wallpaper without the subsequent construction fall

hazard.

2. Walls of concrete and paint, plywood wall panels severe cold bond and

silicon insulating board on the wall thickness of 5 ~ 10cm painted zigzag

construction after you better.

3. Corners of the silicone adhesive strength reinforcement is necessary

because no matter how strong or continuous contact, even when the

foundation could fall because adhesion.

4. Remove all the plastic before attaching the wall and stick to the risk of

missteps here and there, so do not keep your vinyl in advance against the

wall and then cut and paste the right to remove vinyl construction before

 us.

5. Approximately one day after construction is required to give adequate

 ventilation.

Thank you for appreciating our products!!!