Specifications:  

 





I. Component

 

II. Feature

 

1. Attach and detach smart phone to/from stand instantly via magnetism

2. Apply to any smart phone

3. Ball Joint allows for great adjustability for viewing angles

4. Auxiliary plate provides mounting possibility on heavily textured and

    curved surfaces

5. Freely control direction/ angle (front, back, left, right) using fixing lever    

    and hook 

 

III. How to use  

 

1. Clean the phone case inside or phone backside surface thoroughly.

2. Peel of the liner from the disc and stick on the phone case or phone back  

    side, press firmly to the mating surface for 30 seconds to ensure solid contact. 

3. Can install only using suction pad on the flat surface (=Surface not rough).

4. If you need to use auxiliary plate, clean the mounting surface thoroughly and  

    stick the auxiliary plate.   

 

※ Check no gap between the mounting surface and plate,  

     then press firmly for 30 seconds. 

 



5. Attach your smart phone with metal plate on the magnet part, adjust angle what you want.  

 

IV. Caution  

 

1. Install THOROUGHLY when install on the uneven surface

2. Do NOT mount on or near airbag or other hazardous areas.

3. Sticky gel suction cup can be cleaned with warm water

4. Careful when stick on/off.

5. Suction plate(Gel Pad) will be influenced by Cold/Hot weather.

6. Extreme shock may dislodge the smart phone from the stand  

 

V. Install Example

         New Multipurpose Phone Holder…

          Enjoy using your smart phone

          at home, office or in your car 

                  with GLATT mount