UNISON OPEN SPRING MOUNT (OSM)

UNISON OPEN SPRING MOUNT (OSM)


Negotiable Min Order Quantity Unit

Required Quantity
Place of Origin
South Korea
Brand name
UNISON OPEN SPRING MOUNT (OSM)
Payment Terms
L/C,T/T
Production method
Negotiable
Shipping / Lead Time
Negotiable / Negotiable
Keyword
vibration control products, open spring mount, steel spring isolators, vibration products
Category
HVAC Systems & Parts
tK Meet
tK Meet

Apply a video call to the Supplier

SEND TO SUPPLIER INQUIRY

Unison Engineering Co., Ltd.

Membership
VIP
Country / Year Established
South Korea South Korea / 1984
Business type
Manufacturer
Verified Certificate

14

TRADE TOWER

DUNS

ISO

Product name UNISON OPEN SPRING MOUNT (OSM) Certification -
Category HVAC Systems & Parts Ingredients -
Keyword vibration control products , open spring mount , steel spring isolators , vibration products Unit Size -
Brand name UNISON OPEN SPRING MOUNT (OSM) Unit Weigh -
origin South Korea Stock -
Supply type - HS code 7326909000

Product Information

UNISON OPEN SPRING MOUNT (OSM)

 

SPECIFICATION

Steel spring isolators are laterally stable even without any housing as they have the ratio of 1:1 approximately between the horizontal and vertical stiffness and as the free standing type complete with neoprene acoustical pads 0.25“(6mm) thick beneath the base plate this open spring isolators consist of top and bottom load plate and adjustment bolt for leveling which shall be rigidly bolted to the machineries.

 

Spring should be designed to have the diameter not less than 80% of the one when it is compressed at rated load. Springs should also be designed to have a minimum additional 50% travel beyond rated deflection and safe solid stresses. For approval spring diameters, deflections, compressed spring height and solid spring height shall be submitted. We, UNISON Engineering Co., Ltd. manufactures the type OSM for this mountings.

 

 MOUNTINGS
OSM spring mounts are for all installation of high efficiency for small force producing equipment related to air conditioning not requiring the use of snubbing to control movement, as our standard model. As an housed design, this assure lateral stability even without any housing because this has a good ratio between the diameter and the working height. Even though we have requested a minimum of 0.8 for the ratio of the spring diameter over the compressed height, we take a ratio of 1:1 for all of two inch deflection and far below two inch deflection.

 

We consider that a minimum diameter chart pull shed by others rather than a ratio is prejudiced, because all other manufacturers who have not standardized on the specific size shall have difficulty on a predetermined diameter. Really important thing is the proportion of the spring which can be expressed as a ratio rather than a specific size. If, for instances, a spring diameter and height are 5“(125mm) respectively and designed spring constant is 1000lbs(450kgs) per 1”(25mm), it would have about the same lateral stability as a spring of 4“(100mm) diameter and height as it were possible to make it smaller design by using a material of higher stress capabilities.

 

The errors which might be happened due to wrong weight data shall be compensated by minimum 50% of allowance. Also for further guarantees of its long life, the springs of this type operate at a low stress value, this type shall have the neoprene pad on the bottom to prevent transmission of very high frequency vibration and noise. OSM spring mounts provide simple, practical, cost effective solution for Vibration and Noise problems.
We, UNISON Engineering Co., Ltd. manufactures the various kinds of OSM spring mountings from 1“ deflection spring mountings to 4” deflection on spring mountings in order to solve Vibration and Noise problems and to meet the customer‟s requirement.

 

B2B Trade

Price (FOB) Negotiable transportation -
MOQ Negotiable Leadtime Negotiable
Payment Options L/C,T/T Shipping time Negotiable

Unison Engineering Co., Ltd.

Country / Year Established
South Korea South Korea / 1984
Membership
VIP
Business type
Manufacturer

14

TRADE TOWER

DUNS

ISO

President
Misook Lee
Address
Daemyeongvaleon (Munjeong-dong) 127 Beopwon-ro,#801 Knowledge Industrial Center, Songpa-gu, Seoul, Korea
Product Category
HVAC Systems & Parts
Year Established
1984
No. of Total Employees
1-50
Company introduction

UNISON ENGINEERING is a leader in the field of noise and vibration control products for many years in korea. During this time our products have been specified as standard by consultants and architects in korea and overseas. In addition to a complete range of mountings, hangers, flexible connectors, and inertia bases for mechanical equipment, we provide floating floors, walls and suspended ceilings for total acoustical room isolation, Our engineering staffs are here to serve you in meeting all specifications and designs, In addition to the services as mentioned above, our engineering department can help you with recommendations for isolation of all equipments.

 Thank you.

Main Markets

U. Kingdom U. Kingdom

U.A.E. U.A.E.

Viet Nam Viet Nam

Factory Information

UNISON Engineering Co., Ltd.

Main Product
Attached File

Related Products

Other buyers also search

Membership Grade

BUYER

Biz Pro VIP

SELLER

Biz Pro VIP
팝업닫기
Live Chat A new message arrives
from a business partner.

No Data

  • There is no data to load
  • Check out the My tK > My Inquiries list.
  • After agreeing to the use of the Live Chat service, the list is printed only when there is at least one history of receiving or sending a Live Chat request.

If you have not yet agreed to use the Live Chat service,

You can use the Live Chat freely after agreeing to the use of the Live Chat service.

View more
View more