Hot Dipped Galvanized Welded Mesh Panels Products:

The popular specification for export of the year 2015: 
1. Hot dip zinc plated Welded Mesh:  
        Centre to centre distance  :  12 mm
         Panel width                     :  4 ft.
         Panel length                    :  10 ft.
         Wire diameter                  ;  14 gauge

        Centre to centre distance  :  50 mm 
         Panel width                     :  4 ft.
         Panel length                    :  10 ft.
         Wire diameter                  ;  2.3 mm
        
2. Standard Weld Mesh (SWM) Fencing Panels or Rolls 
The mesh panels, support posts and toppings meeting the following specifications:
• Type: Standard weld mesh

Weld Mesh Panels:
• Minimum Overall Height: 2600mm plus 300mm buried below ground.
• Width of panels: approximately 2500mm
• Minimum wire thickness: 3mm.
Posts & Fixings 
• Steel posts min 3mm thick
Coatings 
• All metals Hot Dip Galvanised to BS EN ISO 1461 or equivalent.
• Galvanised wire with polyester coating.
Security Topping
• Barbed Tape Concertina/Razor Coil security topping at least 500mm in height to be applied to the top of the fence.

3.  Heavy Gauge Steel Weld Mesh Panel for Fencing: 
Heavy gauge, narrow aperture weld mesh panels, support posts and security topping meeting the following minimum specifications:

Weld Mesh Panels 
• Minimum Height: 3000mm plus 300mm buried below ground
• Width of panels: approximately 2500mm
• Maximum aperture size: 80 mm x 12 mm (WxH)
• Minimum wire thickness: 3mm.
• All external fixings to be tamper proof
Coatings
• Zinc-Aluminium (95/5) coating. Not to be polyester coated.