Technical Data

Max beat

150 times / min

Max:feeding speed

35 meters / min

Bag accuracy

≤ ± 0.3mm

bag kinds

three-side sealing bag, stand-up bag, stand up- zipper bag.

Unwinding Size

Max: Diameter: 600mm Width: 1200mm.

Bag length

60mm ~ 350mm (to ensure that the second hot pressure, traction maximum length 360mm, more than 360mm use of double- feeding).

Bag width

50-600mm.

Material

plastic Laminate film

main transmission structure

adopt coaxial eccentricity

 power voltage

380V ,50-60Hz

Total power

50kw

 Total weight

about 6000kg

 Dimension

12000 * 1995 * 1870mm (L * B * H)

Structural configuration instructions

1. main driver control: the use of crank-rocker push-pull rod structure.

a) Main motor: DC inventor motor 1pc, power of 4.0 kw.(customer can choose servo motor,but need excharge).

B)speed-down motor:Taiwan geer motor 1 pc.

c)main Frequency Control: Japanese Panasonic inventor 1 units, three-phase 3.7 kw.

2．Traction system: adopt digital AC servo drive control.

a) front traction: Japan Panasonic AC servo motor, power of 1.0 kw.

b) behind traction: Japan Panasonic AC servo motor 2, power 1.5 kw.

3. Unwinding system: the level of a single station horizontal discharge (air shaft 1pc)

a.Web guide motor: Taiwan frequency motor 1unit,power of 0.4kw.

b. Frequency control: 1 unit of Japan Panasonic inverter, power 0.75 kw.

c.unwinding web guide:automatic correction system of 1set,photocell(made in china)2pcs, web guide motor: low speed Permanent magnet synchronous motor 1 set, power 0.14 kw.

d.Unwinding constant tension: Ningxia magnetic powder brake 1;Japan, Taiwan rotary encoder 1

4. Stand-upzipper Component

A). the bottom of the patch material is adopt self-control inventer traction feeding material.

B). 2 sets of punching device (die diameter: 16mm); stand-up adopt photocell control length.

C). hot knife with 2 sets (customer can be choosed)

D). zipper is used as the main ingredient of hot pressure transmission speed heat sealing.

E). Cross Edge of zipper ultrasonic heat sealing;Vertical zipper is the use of combined scalding pressure.

F). the longitudinal heat sealing zipper hot knife ( 2sets) length; 640mm, cold-knife length: 400mm.

G). zipper board 2 sets (1 for double zipper, 1 for single zipper)

h). the bottom of the posted material folding concave bottom traction inverter control used by the triangle coincide equivalent way. punching and then to insert the end.

5. table conveyor: 1 set Taiwan speed-down motor, 0.22 kw.

6. fixed-length control: Photocell sensors (futai,taiwan)1 pc.

7.Automatic control system: Industrial PC, 17 'LCD screen, (Hangzhou Xinda)

8.Temperature control: the use of computer centralized control, K-type thermocouple testing.

A total of 22 road, PC ± 2C °.

9 .pneumatic components: The Shanghai Xinyi, the United States Newman, Taiwan Airtac other brands of pneumatic components.

10. punching system:punch shelf 3 sets,die mould: easy open 1, round hole 2pcs.

11.Rewinding device: 1 units. (for weasting collect)

12. vertically sealing adopt longitudinal combination bridge

structure the sealing blade size and quantity:

a) horizontal sealing:3 sets, the upper and lower heating platepower 3.0KW / block, 90 mm width

b) horizontal cooling: 2sets, cold-hot knife down the length of 640mm, width 90 mm.

c) horizontal hot knife: length 640mm, width 10, 15mm each two,20,30, 40,50 mm each three. (Total 16)

13.

a)rtical sealing: 4 sets, the upper and lower heating plate power3.0KW / block, 60 mm width

b) vertical cooling: 4 sets, cold-hot knife down the length of 510 mm, width 60 mm.

c) longitudinal hot knife: length 740mm, width 10mm two, 15mm, 20mm each three, 30,40,50,60 mm each one. (Total 12)

d) sealing knife Material: Aluminum alloy

e) cooling knife Material: Aluminum alloy

f) a static eliminator. (High power)

g) Cutter: 2. (Including equipment installed 1)