본문으로 바로가기
Product Thumnail Image
Product Thumnail Image

FTU-P200 (Feeder Terminal Unit for LBS control)

By PNC TECH

Negotiable | Min. Order

Description
Introduction FTU is a remote terminal unit for distribution automation which controls and monitors switches on the distribution lines such as Load Break Switch, Recloser, or RMU (Ring Main Units) and measures various electrical quantities of the line and transmits data to control center through remote communication. FTU-200 series are the advanced terminal units which were upgraded from FTU-100 series equipped with more functions and multiple protocols support and enhanced hardware platform. Item List for FTU-200 SERIES 1) FTU for Pole Mounted MV Switches - FTU- P200: Controller for Load Break Switch - FTU- R200: Controller for Automatic Circuit Recloser 2) FTU for Ring Main Unit - FTU-C200: Controller for Ring Main Circuit Breaker Key Features Integrated multi-functions on new microprocessor based platform - Fault detection & Protection, Metering, Control, Status monitoring, Power quality monitoring. Directional protection, Negative sequence protection, SEF and lots of built-in over-current protection curves including IEC, ANSI/IEEE, Recloser curves and customized curves. 4 setting groups and automatic setting group change function. 4 quadrants energy metering & load profiling. Multi-port, multi-protocol communication support (DNP3.0, DNP3.0 over TCP/IP, IEC60870-5-101/104), modem control & dial-up function for SCADA. DNP3.0 subset level 3 with information index mapping & class assignment. Built-in protocol monitor for integrating FTU with DAS system.Large size memory for load profiling, event and fault recording. Available Disturbance waveforms with COMTRADE format.Configurable digital inputs and outputs. Intelligent power supply & battery charger with built-in self-diagnosis & test function. Easy maintenance through separated module design with simple CAN interface. IP54 enclosure for mounting on the pole-top Type tested in accordance with IEC60265-1 and IEEE Std. C37.60 Customized supports for special user-required functions and firmware upgradable at site.
Place of Origin
South Korea
TKPAY Sample
Samples INFO

Negotiable | (Min. Order)

Payment
  • visa
  • master
  • jcb
  • unionPay
  • 12 PNC TECHNOLOGIES CO., LTD.

    Supplier Activity

    Country South Korea South Korea

    KITA DUNS

    Send Message
    PRODUCT DESCRIPTION
    COMPANY INFORMATION
    Product Information

     


    Introduction

     FTU is a remote terminal unit for distribution automation which controls and monitors switches on the distribution lines such as Load Break Switch, Recloser, or RMU (Ring Main Units) and measures various electrical quantities of the line and transmits data to control center through remote communication.

     

    FTU-200 series are the advanced terminal units which were upgraded from FTU-100 series equipped with more functions and multiple protocols support and enhanced hardware platform.

     

    Item List for FTU-200 SERIES

    1) FTU for Pole Mounted MV Switches

    - FTU- P200: Controller for Load Break Switch

    - FTU- R200: Controller for Automatic Circuit Recloser

    2) FTU for Ring Main Unit 

    - FTU-C200 Controller for Ring Main Circuit Breaker

      

    Key Features

    • Integrated multi-functions on new microprocessor based platform - Fault detection & Protection, Metering, Control, Status monitoring, Power quality monitoring.
    • Directional protection, Negative sequence protection, SEF and lots of built-in over-current protection curves including IEC, ANSI/IEEE, Recloser curves and customized curves.
    • 4 setting groups and automatic setting group change function.

     

    • 4 quadrants energy metering & load profiling.

     

    • Multi-port, multi-protocol communication support (DNP3.0, DNP3.0 over TCP/IP, IEC60870-5-101/104), modem control & dial-up function for SCADA.

     

    • DNP3.0 subset level 3 with information index mapping & class assignment.
    • Built-in protocol monitor for integrating FTU with DAS system.
    • Large size memory for load profiling, event and fault recording. Available Disturbance waveforms with COMTRADE format.
    • Configurable digital inputs and outputs.
    • Intelligent power supply & battery charger with built-in self-diagnosis & test function.



     Easy maintenance through separated module design with simple CAN interface.

     

    • IP54 enclosure for mounting on the pole-top 
    • Type tested in accordance with IEC60265-1 and IEEE Std. C37.60 
    • Customized supports for special user-required functions and firmware upgradable at site.

     

     

    Image
    • FTU-P200_CASE.jpg

    Feature

     

    Spec

     

    Company

    PNC TECHNOLOGIES CO., LTD.

    Country South Korea South Korea

    Supplier Activity

    President
    KWANG SIK CHO
    Address
    (Hogye-dong), 62, Jeonpa-ro 104beon-gil, Dongahn-gu, Anyang, Gyeonggi-do
    Product Category
    Passive Components,Power Supplies,Remote Control Switches
    Year Established
    1999
    No. of Total Employees
    51-100
    Company introduction

    Founded in 1999,
    PNC Technologies Co., Ltd. is the leading Korean manufacturer in the field of electrical power industries, especially for Substation and Distribution Automation, Power Protection, Power Measurement, Communication and SCADA system.
    We are preparing the future of power with state-of-the-art technology to fulfill the valuable customer's various needs.

    Main Markets
    • Iran Iran ,
    • Sri Lanka Sri Lanka ,
    • Turkey Turkey ,
    • Taiwan Taiwan
    Factory Information
    PNC Technologies Co., Ltd

    Other Products viewed with This Product