본문으로 바로가기
Product Thumnail Image

TM Screw for Machineries' Automations

Category
Machinery & Parts   > Machinery Parts   > Other Machinery Parts

10 Korea Lintec Shaft

KITA DUNS

Country South Korea South Korea

Supplier Grade level4

Main products Ball Screw
Cross Roller Guide Roller Cages
Lead Screw(TM Screw)
Miniature LM Guide

Product Information
TMR(Standard Rolling 30° TM Screw)
TMR
Number
Lead
P
Lead
Angle
Standard Measurement L(mm) Weight
(kgf/m)
D D2 D1
TMR 10 2 4'02'46" 10 9.0 7.5 1000     0.5
TMR 12 2 3'18'44" 12 11.0 9.5 1000     0.8
TMR 14 3 4'22'07" 14 12.5 10.5 1000 2000   1.0
TMR 16 3 3'46'04" 16 14.5 12.5 1000 2000   1.3
TMR 18 4 4'32'59" 18 16.0 13.5 1000 2000   1.6
TMR 20 4 4'02'46" 20 18.0 15.5 1000 2000   2.0
TMR 22 5 4'39'58" 22 19.5 16.5 1000 2000 3000 2.3
TMR 25 5 4'02'56" 25 22.5 19.5 1000 2000 3000 3.1
TMR 28 5 3'34'17" 28 25.5 22.5 1000 2000 3000 4.0
TMR 32 6 3'46'04" 32 29.0 25.5 1000 2000 3000 5.2
TMR 36 6 3'18'44" 36 33.0 29.5 1000 2000 3000 6.7
TMR 40 6 2'57'18" 40 37.0 33.5 1000 2000 3000 8.4
TMS(Standard Rolling Stainless 30° TM Screw)
TMS
Number
Lead
P
Lead
Angle
Standard Measurement L(mm) Weight
(kgf/m)
D D2 D1
TMS10 2 4'02'46" 10 9.0 7.5 1000     0.5
TMS12 2 3'18'44" 12 11.0 9.5 1000     0.8
TMS14 3 4'22'07" 14 12.5 10.5 1000 2000   1.0
TMS16 3 3'46'04" 16 14.5 12.5 1000 2000   1.3
TMS18 4 4'32'59" 18 16.0 13.5 1000 2000   1.6
TMS20 4 4'02'46" 20 18.0 15.5 1000 2000   2.0
TMS22 5 4'39'58" 22 19.5 16.5 1000 2000 3000 2.3
TMS25 5 4'02'56" 25 22.5 19.5 1000 2000 3000 3.1
TMS28 5 3'34'17" 28 25.5 22.5 1000 2000 3000 4.0
TMS32 6 3'46'04" 32 29.0 25.5 1000 2000 3000 5.2
TMS36 6 3'18'44" 36 33.0 29.5 1000 2000 3000 6.7
TMS40 6 2'57'18" 40 37.0 33.5 1000 2000 3000 8.4
TMC(Standard Rolling Stainless 30° TM Screw)
TMC
Number
Lead
P
Lead
Angle
Standard Measurement L(mm) Weight
(kgf/m)
D D2 D1
TMC10 2 4'02'46" 10 9.0 7.5 250 500     0.5
TMC12 2 3'18'44" 12 11.0 9.5   500 750   0.8
TMC14 3 4'22'07" 14 12.5 10.5   500 750   1.0
TMC16 3 3'46'04" 16 14.5 12.5   500 750 1000 1.3
TMC18 4 4'32'59" 18 16.0 13.5     750 1000 1.6
TMC20 4 4'02'46" 20 18.0 15.5 500 750 1000 1250 2.0
TMC22 5 4'39'58" 22 19.5 16.5   750 1000 1250 2.3
TMC25 5 4'02'56" 25 22.5 19.5 500 750 1000 1500 3.1
TMC28 5 3'34'17" 28 25.5 22.5     1000 1500 4.0
TMC32 6 3'46'04" 32 29.0 25.5     1000 1500 5.2
TTM(Round Nut "Standard" Type)
TTM
Number
Lead
P
Lead
Angle
Standard Measurement D3 L D4 T P.C.D B a L2 Weight
(kgf)
Fo
(Kgf)
D D2 D1
TTM10 2 4'02'46" 10.5 9.0 8.5 20 24 36 5 26 4.3 1.5 9.5 0.079 260
TTM12 2 3'18'44" 12.5 11.0 10.5 22 30 44 5 31 5.4 1.5 12.5 0.118 400
TTM14 3 4'22'07" 14.5 12.5 11.5 22 30 44 5 31 5.4 1.5 12.5 0.111 500
TTM16 3 3'46'04" 16.5 14.5 13.5 28 35 51 6 38 6.6 1.5 14.5 0.201 640
TTM18 4 4'32'59" 18.5 16.0 14.5 32 40 56 6 42 6.6 2 18 0.284 890
TTM20 4 4'02'46" 20.5 18.0 16.5 32 40 56 6 42 6.6 2 18 0.266 1000
TTM22 5 4'39'58" 22.5 19.5 18.0 36 50 61 7 47 6.6 2.5 21.5 0.412 1260
TTM25 5 4'02'56" 25.5 22.5 21.0 36 50 61 7 47 6.6 2.5 21.5 0.370 1440
TTM28 5 3'34'17" 28.5 25.5 24.0 44 56 76 8 58 9.0 2.5 23 0.671 1800
TTM32 6 3'46'04" 32.5 29.0 27.0 52 56 76 8 58 9.0 2.5 23 0.599 2090
TTM36 6 3'18'44" 36.5 33.0 31.0 60 60 84 8 66 9.0 3 26 0.865 2630
TTM40 6 2'57'18" 40.5 37.0 35.0 70 70 98 10 76 11.0 3 30 1.321 3240
1) "Oil Hole" is required by customers need
2) Oil Hole mark is "O"
Ex: TTM20-O
FTM(Round Nut "Square" Flangge Type)
FTM
Number
Lead
P
Lead
Angle
Standard Measurement D3 L D4 T W P.C.D B a L2 Weight
(kgf)
Fo
(Kgf)
D D2 D1
FTM10 2 4'02'46" 10.5 9.0 8.5 20 24 36 5 22 26 4.3 1.5 9.5 0.064 260
FTM12 2 3'18'44" 12.5 11.0 10.5 22 30 44 5 26 31 5.4 1.5 12.5 0.094 400
FTM14 3 4'22'07" 14.5 12.5 11.5 22 30 44 5 26 31 5.4 1.5 12.5 0.087 500
FTM16 3 3'46'04" 16.5 14.5 13.5 28 35 51 6 32 38 6.6 1.5 14.5 0.170 640
FTM18 4 4'32'59" 18.5 16.0 14.5 32 40 56 6 34 42 6.6 2 18 0.248 890
FTM20 4 4'02'46" 20.5 18.0 16.5 32 40 56 6 34 42 6.6 2 18 0.230 1000
FTM22 5 4'39'58" 22.5 19.5 18.0 36 50 61 7 38 47 6.6 2.5 21.5 0.368 1260
FTM25 5 4'02'56" 25.5 22.5 21.0 36 50 61 7 38 47 6.6 2.5 21.5 0.326 1440
FTM28 5 3'34'17" 28.5 25.5 24.0 44 56 76 8 47 58 9.0 2.5 23 0.588 1800
FTM32 6 3'46'04" 32.5 29.0 27.0 44 56 76 8 47 58 9.0 2.5 23 0.516 2090
FTM36 6 3'18'44" 36.5 33.0 31.0 52 60 84 8 54 66 9.0 3 26 0.778 2630
FTM40 6 2'57'18" 40.5 37.0 35.0 58 70 98 10 60 76 11.0 3 30 1.162 3240
1) "Oil Hole" is required by customers need
2) Oil Hole mark is "O"
Ex: FTM 20-O
ATM(Round Nut "H" Flangge Type) Standard Nut
ATM
Number
Lead
P
Lead
Angle
Standard Measurement D3 L D4 T W P.C.D B a L2 Weight
(kgf)
Fo
(Kgf)
D D2 D1
ATM10 2 4'02'46" 10.5 9.0 8.5 20 24 36 5 22 26 4.3 1.5 9.5 0.067 260
ATM12 2 3'18'44" 12.5 11.0 10.5 22 30 44 5 26 31 5.4 1.5 12.5 0.099 400
ATM14 3 4'22'07" 14.5 12.5 11.5 22 30 44 5 26 31 5.4 1.5 12.5 0.092 500
ATM16 3 3'46'04" 16.5 14.5 13.5 28 35 51 6 32 38 6.6 1.5 14.5 0.174 640
ATM18 4 4'32'59" 18.5 16.0 14.5 32 40 56 6 34 42 6.6 2 18 0.253 890
ATM20 4 4'02'46" 20.5 18.0 16.5 32 40 56 6 34 42 6.6 2 18 0.235 1000
ATM22 5 4'39'58" 22.5 19.5 18.0 36 50 61 7 38 47 6.6 2.5 21.5 0.366 1260
ATM25 5 4'02'56" 25.5 22.5 21.0 36 50 61 7 38 47 6.6 2.5 21.5 0.324 1440
ATM28 5 3'34'17" 28.5 25.5 24.0 44 56 76 8 47 58 9.0 2.5 23 0.588 1800
ATM32 6 3'46'04" 32.5 29.0 27.0 52 56 76 8 47 58 9.0 2.5 23 0.516 2090
ATM36 6 3'18'44" 36.5 33.0 31.0 60 60 84 8 54 66 9.0 3 26 0.773 2630
ATM40 6 2'57'18" 40.5 37.0 35.0 70 70 98 10 60 76 11.0 3 30 1.147 3240
1) "Oil Hole" is required by customers need
2) Oil Hole mark is "O"
Ex: ATM20-O
BTM(Square Nut)
BTM
Number
Lead
P
Lead
Angle
Standard Measurement W L H H0 W0 W1 L1 S1 S2 Weight
(kgf)
Fo
(Kgf)
D D2 D1
BTM10 2 4'02'46" 10.5 9.0 8.5 30 24 20 10 15 20 16 M4 3.3 0.09 260
BTM12 2 3'18'44" 12.5 11.0 10.5 38 30 22 11 19 26 20 M5 4.3 0.15 400
BTM14 3 4'22'07" 14.5 12.5 11.5 38 30 22 11 19 26 20 M5 4.3 0.14 500
BTM16 3 3'46'04" 16.5 14.5 13.5 44 35 28 14 22 32 24 M5 4.3 0.26 640
BTM18 4 4'32'59" 18.5 16.0 14.5 48 40 32 16 24 36 28 M6 5.1 0.36 890
BTM20 4 4'02'46" 20.5 18.0 16.5 48 40 32 16 24 36 28 M6 5.1 0.35 1000
BTM22 5 4'39'58" 22.5 19.5 18.0 62 50 38 20 31 46 34 M8 6.8 0.64 1260
BTM25 5 4'02'56" 25.5 22.5 21.0 62 50 38 20 31 46 34 M8 6.8 0.64 1440
BTM28 5 3'34'17" 28.5 25.5 24.0 68 56 47 25 34 52 40 M8 6.8 1.04 1800
BTM32 6 3'46'04" 32.5 29.0 27.0 68 56 47 25 34 52 40 M8 6.8 0.97 2090
1) "Oil Hole" is required by customers need
2) Oil Hole mark is "O"
Ex: BTM 20-O
STM(Square Nut)
STM
Number
Lead
P
Lead
Angle
Standard Measurement D3 L Permission
Load
F0(kgf)
Addition Processing Measurement Weight
(kgf)
D D2 D1 a b f t
STM10 2 4'02'46" 10.5 9.0 8.5 20 20 260 1.5 4 14 2 0.043
STM12 2 3'18'44" 12.5 11.0 10.5 22 22 400 1.5 4 16 2 0.054
STM14 3 4'22'07" 14.5 12.5 11.5 22 22 500 1.5 4 16 2 0.048
STM16 3 3'46'04" 16.5 14.5 13.5 28 26 640 1.5 5 18 2.5 0.100
STM18 4 4'32'59" 18.5 16.0 14.5 32 31 890 2 7 22 2.5 0.160
STM20 4 4'02'46" 20.5 18.0 16.5 32 31 1000 2 7 22 2.5 0.145
STM22 5 4'39'58" 22.5 19.5 18.0 36 40 1260 2.5 7 26 2.5 0.245
STM25 5 4'02'56" 25.5 22.5 21.0 36 40 1440 2.5 7 26 2.5 0.212
STM28 5 3'34'17" 28.5 25.5 24.0 44 45 1800 2.5 10 32 4 0.388
STM32 6 3'46'04" 32.5 29.0 27.0 44 45 2090 2.5 10 32 4 0.330
STM36 6 3'18'44" 36.5 33.0 31.0 52 49 2630 3 12 40 4.5 0.530
STM40 6 2'57'18" 40.5 37.0 35.0 58 57 3240 3 15 42 5 0.762
1) "Oil Hole" is required by customers need
2) Oil Hole mark is "O" Ex: STM 20-O
3) Groove of Key mark is "K" Ex: STM 20-K
Image
Company

Korea Lintec Shaft

Country South Korea South Korea

Supplier Grade level4

President
Woo-ho Lee
Address
#1208-Ga Dong(ChungAng Circulation Complex,Guro-Dong)15,Gyeongin-Ro,53-Gil,Guro-Gu,Seoul(Post Code 08217) ,Korea
Product Category
Machinery & Parts,Other Machinery Parts,Other Bearings
Year Established
2002
No. of Total Employees
1-50
Company introduction
Greetings to customers all around the world!

Our company have been producing all sorts of shafts and exporting to the international market. Our brand "KLS" Shaft (Korea Lintec & Shaft) has been acknowledged for great quality control, competitive pricing, and punctual and fast delivery. Exports have been increasing continuously due to our excellent reputation of great deals and quality by our customers.

Especially, we have developed HPJ Brand's LM Bushings overseas (China), of which trademark HPJ has registered in Japan, which is used with our Shaft and we are exporting them in parallel, and has established ourselves as a maker of LM System. Any Buyers who has imported our Shaft and LM Bushings takes advantage of our
1) Competitive price
2) Top quality products
3) Fast delivery
and continues to do buy our "KLS" Brand Shafts and HPJ Brand LM Bushings. The long term relationship we maintain with these buyers are our greatest strengths.

And,also we are producing many other concerned Items such,
1) "Support Unit",
2)"Micro Coupling"
3)"Lock Nut" for Ball Screw,
4)"TM(Lead) Screw,
5)"Cross Roller Guide","Sector Elignment Stage" is No.2 in the world makers/factories
6)"Miniature Liner Guide",
7)"RodEnd & Camfollower", "Track Roller",
8)"Thrust Roller Bearings",etc.,
are all for Factory Automation Systems,and also for Robot Systems.

Therefore, in 2015, we will put our best effort into increasing our exports, and we promise you that we will be the number one Brand of above all Products in the near future.


Chief Representative: Woo Ho Lee
Main Markets
  • China China ,
  • Germany Germany ,
  • Denmark Denmark ,
  • France France ,
  • Mexico Mexico ,
  • Malaysia Malaysia ,
  • Singapore Singapore
Factory Information
KLS, Korealintec & Shaft