Support Unit for Ball Screw and Motors

Support Unit for Ball Screw and Motors


Negotiable Min Order Quantity Unit

Required Quantity
Place of Origin
Payment Terms
Negotiable
Production method
Negotiable
Shipping / Lead Time
Negotiable / Negotiable
Keyword
Category
Other Machinery Parts
tK Meet
tK Meet

Apply a video call to the Supplier

SEND TO SUPPLIER INQUIRY

Korea Lintec Shaft

Membership
VIP
Country / Year Established
South Korea South Korea / 2002
Business type
Distributor
Verified Certificate

14

DUNS

Product name Support Unit for Ball Screw and Motors Certification -
Category Other Machinery Parts Ingredients -
Keyword - Unit Size -
Brand name - Unit Weigh -
origin Stock -
Supply type - HS code -

Product Information

KLS Support Units

Characteristics of KLS Supports Units

Structure
The support unit for fixture part is assembled by angular ball bearing with high rigidity and low torque in face-to-face duplex format that is appropriate to the dynamic property of rotation shaft. In addition, it can achieve highly accurate rotation capability through precise adjustment on preload. the support unit for support part uses deep groove ball bearing. There is oil seal framed in the unit, and it prevents the grease from leaking. It prevents the influx of fine dusts or foreign substances and allows longtime use.

Shape and Classification
There are two types of units that are available for different conditions of installation and use. One employs angle type(block type) structure where the unit is fixed on the base surface, and the other employs round type(flange type) structure where the unit is inserted into a hole for fixation. The unit is also divided into two parts depending on the position of power transmission shaft - the part for support on the other side.

Features

Simplicity of Design and Assembly
Standardization of product allows highly effective design. Additional assembly process is not required, and the stability of assembly precision can be easily improved as bearing of the support unit is assembled at optimal preload condition. Moreover, the standardized product ensures superior compatibilty.

High Precision
Angular contact ball bearing is precisely assembled in face-to-face duplex format. The influence by assembly error is minimized and the precision of rotation shaft is maintained as the product structure is designed to absorb parallel error between rotational shaft and guide about the center of the shaft.

Dust-Proof Effect
The support unit is framed with oil seal to prevent the influx of fine dusts or foreign substances and thus enhances operation precision. Furthermore, it allows longtime use as grease leakage is prevented by minimizing the tolerance between the oil seal and the rotation shaft.

Steps to install the Support unit

1. Assemble to Support Units

1)Connect the unit for fixture part to ball screw
.It is not allowed to dissemble the unit as its preload has been already controlled
.The wing part of the oil seal should bot be folded when ball screw is inserted into the unit.

2)After inserting the ball screw into the unit, put the collar and couple and adjust the locknut. Then place the set piece in the stop screw part of the locknut and tighten the stop screw.
.Adhesive can be used to prevent the locknut from being loosened

3)Mount the nut bracket on ball screw.

4)After connecting the unit ball bearing for support part to the ball screw, fix the snap ring and assemble to the housing.

2. Assemble to Table and Base

1)Connect table to the nut bracket of ball screw.

2)Preassemble the support unit for fixture part to the designed position of the base.
.When the unit for fixture part is the standard, adjust to have clearance in external diameter of the nut and internal diameter of the table or bracket.
.When the table is the standard, adjust the height of angle type unit. For flange type, adjust to have clearance in external diameter and internal diameter.

3)Connect the unit housing for support part to ball screw and preassemble to the designed position of the base.

3. Precision of Rotation Shaft and Coupling

1)Move the table connected to the ball screw toward the center of the shaft in order to place the center of the shaft in order to place the center of the shaft properly. Make alternating motion so that its linear movement can become smooth.

2)While measuring the tolerance toward the direction of the shaft and the vibration at the end of the rotational shaft of the ball screw, measure the center of the shaft and couple in the order of nut bracket and table, the unit for fixture part, the unit for support part and base.

4. Drive Motor and Assembly

1)Precisely connect the bracket installed on the motor to the base by matching it with the shaft center of the ball screw.

2)Connect the coupling to the motor and the shaft for fixture part.
.Careful attention is necessary during assembly as the assembly condition of the motor bracket and the coupling affects the positioning of table.

3)Check the precision of the shaft center by conducting enough test operation while driving the motor at slow speed.

B2B Trade

Price (FOB) Negotiable transportation -
MOQ Negotiable Leadtime Negotiable
Payment Options Negotiable Shipping time Negotiable

Korea Lintec Shaft

Country / Year Established
South Korea South Korea / 2002
Membership
VIP
Business type
Distributor

14

DUNS

President
Woo-ho Lee
Address
#1208-Ga Dong(ChungAng Circulation Complex,Guro-Dong)15,Gyeongin-Ro,53-Gil, Guro-gu, Seoul, Korea
Product Category
High Precision Bearings
Year Established
2002
No. of Total Employees
1-50
Company introduction

Greetings to customers all around the world!

Our company have been producing all sorts of shafts and exporting to the international market. Our brand "KLS" Shaft (Korea Lintec & Shaft) has been acknowledged for great quality control, competitive pricing, and punctual and fast delivery. Exports have been increasing continuously due to our excellent reputation of great deals and quality by our customers.

Especially, we have developed HPJ Brand's LM Bushings overseas (China), of which trademark HPJ has registered in Japan, which is used with our Shaft and we are exporting them in parallel, and has established ourselves as a maker of LM System. Any Buyers who has imported our Shaft and LM Bushings takes advantage of our
1) Competitive price
2) Top quality products
3) Fast delivery
and continues to do buy our "KLS" Brand Shafts and HPJ Brand LM Bushings. The long term relationship we maintain with these buyers are our greatest strengths.

And,also we are producing many other concerned Items such,
1) "Support Unit",
2)"Micro Coupling"
3)"Lock Nut" for Ball Screw,
4)"TM(Lead) Screw,
5)"Cross Roller Guide","Sector Elignment Stage" is No.2 in the world makers/factories
6)"Miniature Liner Guide",
7)"RodEnd & Camfollower", "Track Roller",
8)"Thrust Roller Bearings",etc.,
are all for Factory Automation Systems,and also for Robot Systems.

Therefore, in 2015, we will put our best effort into increasing our exports, and we promise you that we will be the number one Brand of above all Products in the near future.


Chief Representative: Woo Ho Lee

Main Markets

Germany Germany

Factory Information

KLS,

Korealintec & Shaft

Main Product

Related Products

Other buyers also search

Membership Grade

BUYER

Biz Pro VIP

SELLER

Biz Pro VIP
팝업닫기
Live Chat A new message arrives
from a business partner.

No Data

  • There is no data to load
  • Check out the My tK > My Inquiries list.
  • After agreeing to the use of the Live Chat service, the list is printed only when there is at least one history of receiving or sending a Live Chat request.

If you have not yet agreed to use the Live Chat service,

You can use the Live Chat freely after agreeing to the use of the Live Chat service.

View more
View more