security anti-theft wholesale iphone display stand holder wall for cell phone,mobiles,MP3

Product Details:

Detailed Product Description

1:Security alarm holder for mobile
2:Display on the wall or tilt display counter or board display
3: Color:Black / white
4.Allowing customers to take the sample on hands and try it freely 
5.With sticker connecting the samples which effectively prevent showing products

from being stolen in exhibition, supermarket and shops,

Technical parameter

1.Product Height: 100 * 65 * 75MM

2.Internal Battery type: 3.7V rechargeable lithium battery.

3.External power adapter: DC5V 1000MA

4.Battery Standby Time: 2 months

5 Charge indicator: charging in red , full in green

6.Alarm sound: 105DB.

7) Alarm indication: LED red flashes.

8) Shell Material: ABS

9) Shell Color: bright black ,  pearl white

Function:

1) Host Base with Charging Function, Charging monthly , Repeated use.

2)Display Charging Function apply to : Mobile Phone ,  DC camera ,  Tablet PC

3)Disconnection Alarm Function: Three Contacts disconnection alarm

4)Low Voltage Alarm Function :Voltage Less 3.3V  Alarm ,remind the charging

5)Short Circuit Alarm Function : circuit is short-circuited ,automatic alarm

6)Infrared Remote Control Function : Remote Start and Disarm the Alarm.

7)Installation Method : Double ways  in 3mm adhesive or use screws tighten.

Packaging materials

1).Individual Packing: PE ,  PCS, the color- box packing , size 170 * 120 * 80MM

2).Carton packing: standard export carton, size: 50 * 35 * 19CM.

3).NW/pc :160G

4).GW/pc:330G

5).NW/CTN: 5.3KG

6).GW/CTN :6.1KG

Products installation
1.Clean the display case, then turn on switch on the bottom of Security alarm holder for mobile   host, adhere the bottom of the anti-theft frame with 3M adhesive tape to the exhibit cabinet. Or use two anti-theft screws to connect the cabinet frame and tighten the exhibition (open f the screw hole cover firstly)

2.Connect the charger of Security alarm holder for mobile   with the alarm host, the other end into the power socket in preparation for a fixed monthly charge.

3.Tear off the 3 adhesive tape from the Anti-Theft Terminal product display and paste exhibit’s back fastened

4.Tear off 3M adhesive from the sensor probe, stick tight with the obverse of the product

5.Take out the Infrared remote control board , tear off the battery insulation sheet underneath. Press the ON key , the host switch on ,enter the preset alarm status                                         

Products list

1 .  host base (with a rechargeable lithium battery inside) 1 pcs.

2, Aalarm sensor probe(with a magnetic back, paste 3M adhesive. Extension cords ) 1 set

3, Charger and USB charging cable   1 set

4, Cell phone charging adapter cable  1 pcs

5, Remote control                   1 pcs

6 Operation Manual                 1pcs

7 Additional 3M adhesive and screws  1 set

(E:kensmithyahoo.cn,skipe:kensmith1001)

FAQ and solutions about Security alarm holder for mobile