본문으로 바로가기
Product Thumnail Image

Tilting Disc Check Valves

Negotiable | Min. Order

Description
Tilting Disc Check Valves Stainless Steel Tilting Disc Check Valve Tilting disc check valves are designed with a hinge point moved to the downstream side of the disc in order to increase the sensitivityto pressure and flow and aid the operation at low pressuredifierentials. Tilting disc check valves are designed to be stable at low and pulsing flows, Even though tilting disc check valves generally havesimilar minimum required velocities to that of swing check valves,they can provide stable operation over a wider range of flows dueto the hinge Spoint being closer to the center of the disc Due to the short disc travel distance to the valve seat, the response of the valves to pressure and flow is fast, reducing thedevelopment of reverse flow and therefore minimizing a slamwithout damage of the body, disc or seat. Tilting disc check valves have two piece body design that should be removed fro the piping system to perform maintenance. Theycan be installed to prevent reversal of flow in horizontal or verticalpipe lines. In vertical lines, they can be used fluid flow is upward. To avoid premature wear and noisy operation of the moving part,the ploper size of the valve should be considered on the basis offlow conditions Production Range Class Size 150 2"~24" Design Standards Pressure-Temperature rating ANSI B16.34 Face to Face Dimensions Make Standards End Flange Dimensions ASME B16.5 Body wall thickness ANSI B16.34 Standard Material Specifications Part Name Material Body A315-CF8M(CG8M) Insert Seat A315-CF8M(CG8M) Disc A315-CF8M(CG8M) Stopper A24-316(317) Hinge Pin A24-316(317) Gasket PTEF Body Bolt A193-B8 BodyNut A194-8 Plug A276-316(317) Name Plate A240-304
TKPAY Sample
Samples INFO

Negotiable | (Min. Order)

Payment
  • visa
  • master
  • jcb
  • unionPay
  • 7 Samjin JMC Co., Ltd.

    Supplier Activity

    Country South Korea South Korea

    Send Message
    PRODUCT DESCRIPTION
    COMPANY INFORMATION
    Product Information

    Tilting Disc Check Valves

    Stainless Steel Tilting Disc Check Valve
    Tilting disc check valves are designed with a hinge point moved to the downstream side of the disc in order to increase the sensitivityto pressure and flow and aid the operation at low pressuredifierentials.

    Tilting disc check valves are designed to be stable at low and pulsing flows, Even though tilting disc check valves generally havesimilar minimum required velocities to that of swing check valves,they can provide stable operation over a wider range of flows dueto the hinge Spoint being closer to the center of the disc

    Due to the short disc travel distance to the valve seat, the response of the valves to pressure and flow is fast, reducing thedevelopment of reverse flow and therefore minimizing a slamwithout damage of the body, disc or seat.

    Tilting disc check valves have two piece body design that should be removed fro the piping system to perform maintenance. Theycan be installed to prevent reversal of flow in horizontal or verticalpipe lines. In vertical lines, they can be used fluid flow is upward.

    To avoid premature wear and noisy operation of the moving part,the ploper size of the valve should be considered on the basis offlow conditions

    Production Range

    Class
    Size
    150
    2"~24"

    Design Standards

    Pressure-Temperature rating
    ANSI B16.34
    Face to Face Dimensions
    Make Standards
    End Flange Dimensions
    ASME B16.5
    Body wall thickness
    ANSI B16.34

    Standard Material Specifications

    Part Name
    Material
    Body
    A315-CF8M(CG8M)
    Insert Seat
    A315-CF8M(CG8M)
    Disc
    A315-CF8M(CG8M)
    Stopper
    A24-316(317)
    Hinge Pin
    A24-316(317)
    Gasket
    PTEF
    Body Bolt
    A193-B8
    BodyNut
    A194-8
    Plug
    A276-316(317)
    Name Plate
    A240-304
    Image
    Company

    Samjin JMC Co., Ltd.

    Country South Korea South Korea

    Supplier Activity

    President
    Taehee Jung
    Address
    1-31, Daehwa-dong, Daedeok-gu, Daejeon, Korea
    Product Category
    Valves
    No. of Total Employees
    51-100
    Company introduction

    We would like to express our gratitude to all of our customers and clients who have supported us throughout the years.

    Ever since its establishment in 1991, SAMJIN has developed into one of major valve manufacturers in Korea. Our success in the industry is heavily indebted to your support and encouragement.

    Through continuous product development and technology enhancement, we will continue to work  hard to repay our customers' love and support.
    We would especially strive hard to become a leading brand in the valve industryin both the domestic and global market.

    We hope you will continue to cheer us on and support us as we develop into an innovative companyof greater value and success.

    Other Products viewed with This Product