본문으로 바로가기
Product Thumnail Image
Product Thumnail Image
Product Thumnail Image
Product Thumnail Image
Product Thumnail Image
Product Thumnail Image

Express X80(EC)

By GHI Yachts

Negotiable | Min. Order

Description
Express X80(EC) The Express 80(EC) has been designed for high performance, optimum manoeuvring capabilities and excellent sea-keeping characteristics.The hull is a high lift, deep V-type with a hard chine, planing type. This hull form results in outstanding speed with high transverse stability and a sea kindly motion underway in any sea condition. The incorporation of integral tanks in the bottom of the hull allows for excellent range and represents a great safety element. They create a watertight double bottom, which protects against the consequences of damage to the hull. Moreover, the location and uniform distribution of the liquids on the bottom increases the stability and helps the Yacht to maintain a constant trim at all loading conditions.The propulsion system is composed of two diesel engines, each driven by a fixed pitch propeller through a reduction gear. The Yacht will be equipped with a couple of semi-compensated spade rudders and one bow thruster.The electric power required for ship service shall be supplied by two diesel generators.Particular care will be taken to noise insulation all over the boat, and in particular to critical noise and vibration sources as main engines, rotating equipment and air/gases ducts.At design stage, particular care will be put on maintenance friendly systems and equipment, so to reduce maintenance time after launch. Technical DataAll aluminum structure Length over all: 77.80 ft (23.74 m) Length on the waterline: 60.00 ft (18.30 m) Beam: 18.04 ft (5.50 m) Draft: 3.30 ft (1.00 m) Displacement: 48 tons Fuel: 6,900 L Water: 1,440 L Speed Max: 30.0±1 knots
Place of Origin
KR
TKPAY Sample
Samples INFO

Negotiable | (Min. Order)

Payment
  • visa
  • master
  • jcb
  • unionPay
  • 7 GHI Yachts

    Supplier Activity

    Country South Korea South Korea

    Send Message
    PRODUCT DESCRIPTION
    COMPANY INFORMATION
    Product Information

    Express X80(EC)

    The Express 80(EC) has been designed for high performance, optimum manoeuvring capabilities and excellent sea-keeping characteristics.

    The hull is a high lift, deep V-type with a hard chine, planing type. This hull form results in outstanding speed with high transverse stability and a sea kindly motion underway in any sea condition. The incorporation of integral tanks in the bottom of the hull allows for excellent range and represents a great safety element. They create a watertight double bottom, which protects against the consequences of damage to the hull. Moreover, the location and uniform distribution of the liquids on the bottom increases the stability and helps the Yacht to maintain a constant trim at all loading conditions.

    The propulsion system is composed of two diesel engines, each driven by a fixed pitch propeller through a reduction gear. The Yacht will be equipped with a couple of semi-compensated spade rudders and one bow thruster.

    The electric power required for ship service shall be supplied by two diesel generators.
    Particular care will be taken to noise insulation all over the boat, and in particular to critical noise and vibration sources as main engines, rotating equipment and air/gases ducts.

    At design stage, particular care will be put on maintenance friendly systems and equipment, so to reduce maintenance time after launch.

    Technical Data

    All aluminum structure

    • Length over all: 77.80 ft (23.74 m)
    • Length on the waterline: 60.00 ft (18.30 m)
    • Beam: 18.04 ft (5.50 m)
    • Draft: 3.30 ft (1.00 m)
    • Displacement: 48 tons
    • Fuel: 6,900 L
    • Water: 1,440 L
    • Speed Max: 30.0±1 knots

     

    Image
    • 7_Express_X80EC_03.jpg

    • 7_Express_X80EC_02.jpg

    • 7_Express_X80EC_04.jpg

    • 7_Express_X80EC_05.jpg

    • 7_Express_X80EC_06.jpg

    Company

    GHI Yachts

    Country South Korea South Korea

    Supplier Activity

    President
    Bong Chul Kim
    Address
    1697-5, Nanchun-ri, Samho-eup, Youngam-gun, Jeonnam
    Product Category
    Rowing Boats,Yacht
    No. of Total Employees
    101-500
    Company introduction
    GHI Yachts is a complete yacht manufacturing facility based in South Korea, in the center of the North-East Asian Sea between China and Japan, the strategic gate to Eurasia and convenient to the American markets. We are well positioned to meet the needs of yachting clients around the world, covering all aspects including design, engineering, construction, service and logistics, as well as providing complete service training. Our luxurious custom built yachts are masterpieces of modern technology. GHI Yachts blends composite technology, state of the art steel and aluminum constructions with the world’s top designers, consultants and suppliers from the USA and Europe. Working within our GREEN shipbuilding policy, we pride ourselves on building each yacht specifically for each new owner. We employ an efficient production method in which we finely craft steel and aluminum structures along with comfortable and attractive interiors. Our ecological and effective shipbuilding program makes it possible for your new custom yacht to be available for your enjoyment in only 7 to 22 months depending on your choice of model. Our aim is to build long term relationship with you. As a GHI customer, you should expect nothing but the best service possible every time you deal with one of our representatives. We commit to satisfy every question, assist in resolving any problem, and make every moment of your cruising experience one the most pleasurable and memorable times of your life.

    Other Products viewed with This Product