본문으로 바로가기
Product Information

Urethane adhesive for Honeycomb




│ OUTLINE │


The TYC-4000 series is a single-component type urethane adhesive that bonds EPS and Honeycombs with steel plates, which are usually used for radiators and fireproof doors. Generally, for radiators and fireproof doors, glass wool and honeycomb go between iron plates. The adhesive used to bond glass wool and honeycomb with iron plate is urethane adhesive. Our company’s urethane adhesive for glass wool, honeycomb, and rebound foam is a single component type, and is widely used in radiator and fireproof door production businesses for its excellent adhesion and solution safety.


│ GENERAL PROPERTIES OF MATTER │


GRADE Property Viscosity
(Cps at 25C)
Specific gravity
(at 25C
NCO % Pot life time
(at 25C)
TYC-4000 series Lemon yellow liquid 1500~2500 1.18~1.20 16~17 20~25 minutes


│ CHARACTERISTIC │


  • Excellent adhesion and workability.
  • Excellent cold flexibility and thermal resistance.
  • A single-component type, which makes manual labor (hera, brush) easy.
  • Unlike two-component types, there will not be faults caused by mixing ratio.
  • It is moisture-sclerotic, so pot life time can be reduced by moisturizing.


│ USE METHOD AND PRECAUTION │


Store this product at 10–25°C and keep it in an airtight container to avoid exposure to moisture and air.
Use protective gear, such as protective gloves, at the workplace. Ventilate the workplace at all times, in case of contact with eyes, wash with running water immediately, and consult a doctor. Temperature change affects viscosity, property of matter, and usability, so maintain optimal temperature (20–30°C) when working with the product.
Poor pressure may cause adhesion problems, so compress for more than three hours after spreading the product.
After opening the container, use the adhesive as soon as possible, and the remaining adhesive should be sealed with nitrogen gas (the shelf life is six months in an airtight container, but it can vary due to the moisture in the air).

Image
  • Urethane adhesive for Honeycomb

  • Urethane adhesive for Honeycomb

  • Urethane adhesive for Honeycomb

  • Urethane adhesive for Honeycomb

Company

TAE YOUNG

Country South Korea South Korea

Supplier Grade level3

President
Lee Young Sil
Address
21-87, Geumsin-ro 2-gil, Cheongan-myeon, Goesan-gun, Chungcheongbuk-do, SEOUL 367-831 Rep. of KOREA
Product Category
Adhesives & Sealants,Insulator,Flooring & Accessories
Year Established
2009
No. of Total Employees
1-50
Company introduction

Taeyoung Inc. provides polyurethane systems tailored to customer needs.

 

Our company is a business that provides polyurethane systems. Along with this, we constantly research and develop to meet the consumers' demands. Our company is built on trust and commitment to customers.

The alternative polyurethane foam that our company produces has many advantages, such as excellent insulation, self-adhesive properties, lightness, fill-ability, simplicity and diversity. Unlike other insulators, it has two-component adhesives for prefabricated sandwich panels and fiberglass, single-component adhesive for Honeycombs. 

Therefore, it is widely used as an insulator for electric refrigerators, refrigeration containers, building insulation, tank insulation, double pipe insulation, cold warehouses, etc.