본문으로 바로가기
Product Thumnail Image
Product Thumnail Image
Product Thumnail Image
Product Thumnail Image
Product Thumnail Image

12 HANICS TECHNOLOGY CO., LTD.

KITA DUNS

Country South Korea South Korea

Supplier Grade level3

Main products Hearing aid_Dual Mode Bone Conduction Earbuds
Bone Conduction Hearing Assistive Headset
HANDSET_H250_MILITARY DYNAMIC HANDSET
Bone Skin Conduction Microphone unit

Product Information

In-Ear Type Dual Mode Bone Conduction Earbuds_Hearing Aid Device(HIB-210DM)

Some hearing aids employ bone conduction, achieving an effect equivalent to hearing directly by means of the ears. A headset is ergonomically positioned on the temple and cheek and the electromechanical transducer, which converts electric signals into mechanical vibrations, sends sound to the internal ear through the cranial bones. Likewise, a microphone can be used to record spoken sounds via bone conduction.

Hanics Assistive Listening Device, Dual Mode Bone Conduction Earbuds is designed based on bone conduction technology and its combination with air conduction. It is primarily suited for people who have conductive hearing loss, unilateral hearing loss and people with mixed hearing loss. Also, this Assistive Listening Device is good for people who are hard of hearing or who are considering the use of hearing aid devices for the first time. The Hanics's Assistive Listening Device (Dual Mode Bone Conduction Earbuds) is designed to provide hearing ability for people in a variety of situations with clarity and comfort, even in noisy environments.

Uses a Dual-mode system that allows you to hear sound through both the bone conduction and air conduction pathways simultaneously.

Applies Auto Level Control Circuit.

Applies a circuit which properly controls any sudden loud sounds, and is the best solution to protect your ears.

Bone conduction products are usually categorized into three groups:

  • Ordinary products, such as hands-free headsets or headphones
  • Hearing aids and assistive listening devices 
  • Specialized communication products (e.g. for underwater or high-noise environments)

One example of a specialized communication product is a bone conduction speaker that is used by scuba divers. The device is a rubber over-moulded, piezoelectric flexing disc that is approximately 40 millimetres (1.6 in) across and 6 millimetres (0.24 in) thick. A connecting cable is moulded into the disc, resulting in a tough, waterproof assembly. In use, the speaker is strapped against one of the dome-shaped bone protrusions behind the ear and the sound, which can be surprisingly clear and crisp, seems to come from inside the user's head.


Steps (Noise is reduced automatically to protect your ear)
(1) Slience Mode - use in quiet environments such as the inside of a house
(2) Noise below 50dB - Filtering the sound of the wind & Roadside interior
(3) Noise below 60dB - Filtering the noise at a restaurant & Roadside Exterior

High Efficient Mic, applies specific MICOM circuit

With patented speaker units, reduce any sound exposure than other general earbuds and headset.

Hanics have got certifications like CE0120, ISO13485 and so on.

Technical Specification

  • Output(AIR) - Max. 25dBPL
  • Output(Bone Conduction) - Max. 120dBSPL
  • Sound Volume Gain - Max. 120dBSPL
  • Frequency Response - 300Hz ~ 5,000Hz
  • Battery - Lithium Polymer 3.7V
  • AC Adapter - 110 ~ 240V
  • Operation Time - Over 10 hours (Voice Mode)
  • Size - 25mm x 18.5mm x 64mm
  • Weight - 33g(Ear-bud only)

 

Image
  • HIB210DM(3).jpg

  • 210DM(2)(500).jpg

  • HIB210DM(2).jpg

  • 210DMController(700).jpg

Company

HANICS TECHNOLOGY CO., LTD.

Country South Korea South Korea

Supplier Grade level3

President
KIM, SUNG-HO
Address
HANHO B/D 3F, 772-5, 921-14, KANSUK 3-DONG, NAMDONG-GU, INCHON
Product Category
Earphones & Headphones,Other Health Care Products,Microphones
No. of Total Employees
1-50
Company introduction

Some hearing aids employ bone conduction, achieving an effect equivalent to hearing directly by means of the ears. A headset is ergonomically positioned on the temple and cheek and the electromechanical transducer, which converts electric signals into mechanical vibrations, sends sound to the internal ear through the cranial bones. Likewise, a microphone can be used to record spoken sounds via bone conduction.

Hanics has been specially manufacturing all kinds of Microphones or Headset and Micro Speaker Unit for communication equipments and Audio products for the past 29 years. The valuable experience we have gained over time has made us one of Korea's leading firm in this field. With the accumulated know-how of acoustic sound and many years of experience and practical knowledge in the field of communication, we have developed Bone Conduction Headset, Throat Microphone and Vibration Speaker for multi communication a year ago and have since enjoyed good reputations with this product in many countries. 
 
 With an expanding network of business contacts in this field, we have to offer tradingservices of sourcing, buying and engineering directly to our regular customers. Hanics is extremely focused on quality. In this regards, additional design,, manufacture and test resources are constantly evaluated with regards to potential improvements, within a definable return on investment framework.   

 We are pursing an aggressive continuous improvement road map which enables customers to have the highest level of confidence that Hanics is superior outsourcing partner to team up with. Hanics hope you will find our products and services more attractive than before and we look forward to developing a business relationship with you in the near future.

Main Markets
  • Germany Germany ,
  • Italy Italy ,
  • Japan Japan ,
  • South Korea South Korea ,
  • Ukraine Ukraine ,
  • U.S.A U.S.A
Factory Information
HANHO FACTORY