TIGER FOAM B1
Negotiable Min Order Quantity Unit
- Required Quantity
- Place of Origin
- South Korea
- Brand name
- TIGER FOAM B1
- Payment Terms
- Production method
- Shipping / Lead Time
- Negotiable / Negotiable
- Construction Adhesives
|Product name||TIGER FOAM B1||Certification||-|
|Keyword||polyurethane , pu foam , ocf , fire rated||Unit Size||-|
|Brand name||TIGER FOAM B1||Unit Weigh||-|
|Supply type||-||HS code||321410|
Tiger Foam B1 (G) is Gun type, a polyurethane-based fast curing expanding foam.
Filling gaps and voids that occur around the home and during building construction
Installation of window and door frames
Insulation of pipes
Excellent adhesion on most materials (except PE/PP, Silicone, Teflon)
High thermal insulation and sound absorption
Very good filling capacities
Quick and easy gap filler
Shelf Life: 12 months in un-opened from original packaging
Storage Conditions: Store at temperature between +18 ℃ and +22 ℃.
Tack Free Time
10 min at 20°C/65% R.H
About 60 mins for a bead of 20mm at 20°C/65%r.h.
About 1.3 times
Density of freely expanded foam
-40°C until +100°C (cured)
B1 (DIN 4102 part 1)
Max. 55 +/- 3 liter/can
▪ The substrate must be free or dust, grease, oil and surface contaminants.
▪ The surface should be pre-moistened with water before application to ensure that:
(a) The foam cures at an optimum rate, and
(b) Secondary foam expansion is prevented.
APPLICATION METHOD / TOOLS
▪ Screw the foam applicator onto the can
▪ Shake can thoroughly (approx. 20 times) before use.
▪ Apply foam by pointing nozzle into area to be filled and depressing. It can be applied valve up or down.
▪ Foam will dispense rapidly and will expand 1.3 times its size as it comes out of the can
▪ The quantity of foam can be regulated by varying the pressure on the adaptor.
CLEANING OF TOOLS
▪ Remove fresh spots of foam immediately using acetone or foam cleaner.
▪ Cured foam can only be removed mechanically.
The aerosol cans must be stored in a vertical position under room temp. Content under pressure. Exposure to temperatures over + 40 °C may cause bursting. Contains diphenylmethane-4,4’-diisocyanate. Harmful by inhalation. Irritating to eyes, respiratory system and skin.
Apply the usual industrial hygiene.
Wear gloves and safety goggles
Remove cured foam by mechanical means only, never use a burner.
Do not touch the surface during the curing time at frost temperatures.
Always moisten surfaces before application in order to improve curing and cellular structure
Cured PU Foam must be protected from UV radiation by painting.
Tiger Foam (G) does not adhere to Teflon, polythene, silicone or grease.
For special uses, test Tiger Foam (G) in advance.
Aged material can yield up to 30 % less than the specified value.
BASIS OF PRODUCT DATA
All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.
|Payment Options||Negotiable||Shipping time||Negotiable|
- jae-you koh
- Deoksan-myun, Gusan-ri,518-2, Jincheon-gun, Chungcheongbuk-do, Korea
- Product Category
- Construction Adhesives
- Year Established
- No. of Total Employees
- Company introduction
SeungHyun Co., Ltd located in Jincheon, Chungbuk focuses on the development and production of one-component polyurethane foam enterprises. SeungHyun Co., Ltd is providing Total Solutions for Customer Satisfaction with specializing Industrial and Household Aerosol products’ OEM, ODM filling, packaing. Currently, SeungHyun Co., Ltd is in active entry in local market as well as overseas’ market like Japan, Australia, South-East Asia, Russia, Mongol with result in significant growth.
- Main Product
polyurethane concrete crack repairing resin
all purpose adhesive ,solvent based contact cement adhesive
heat resistance synthetic rubber contact cement glue