본문으로 바로가기
Product Information

OILSEIZER®

Oil Scum Skimmer (formerly Scum Skimmer)

 KOS-B-SR series Oil Scum Skimmers are frequently used to remove or recover floating oil and oily scum from the surface of water or solutions. For adequate skimmer operation, various sorts of lubricants for motors or machineries, fats, oil and grease (FOG) should all be immiscible and in a free-flowing state. Also, for more effective oil skimming capability, the water surface needs to be stable and oil droplets, mechanically and temporarily suspended in the water, be allowed appropriate time until they freely rise up to the surface before oil droplet-laden water lastly moves away as effluent. Also called a scum skimmer or scum remover. Removal of chemically emulsified oil and semi-solid grease or fat requires using another device.

 

How it works

The motor-driven head pulley turns and moves the oleophilic belt around the circuit from the head pulley to the tail pulley below water so that the belt can enter and exit the water to continuously contact with surface oil layers. Oil sticks to both sides of the rotating belt and gets wiped out as the belt passes through two bisymmetric wiping blades. Specially in a situation where there is, in addition to some oil, much floating oily scum on the water surface that consequently deposits down within the skimmer or clogs up its oil or water outlet, KOS-B-SR series is very useful since the positively sloped guide chute has been added to the posterior of the skimmer by removing the small size gravity O/W separator of KOS-B series, so that there is no room for oily scum to deposit within the skimmer and oily scum rapidly drains outside as soon as get wiped off through a set of wiping assembly.

 

Features

 - Rugged construction, simple installation, least installation space

- Several models: treat different hourly peaks of oil influx as one of standards for selection of skimmers

- Oil discharge chute: rapidly discharges off oil and oily scums outside along the positively sloped guide chute

- Material: Stainless steel or powder coated steel

- Screen cover: allows instant observation on how the belt moves and oil being wiped off, whenever required

- Adjustable wiper blades: closely contact with both belt surfaces ar the same time

- Oil- and wear-resistant wiper blades

- Uninterrupted skimming operation regardless of fluctuating water level

- Simple belt replacement

- Pulley yoke with chain: prevents a tail pulley from deviating or falling off

- Belt: endless, made of chemical resistant poly or stainless steel as an option for special application in hot liquid above 80℃

- Motor cover: an option protects against direct rainwater and sunray in outdoor installation

 

Specifications

 

Model

KOS-B0512SR

KOS-B1012SR

KOS-B1020SR

KOS-B2020SR

Remarks

Oil Removal Rate

(max. per hour)

23ℓ

45ℓ

100ℓ

200ℓ

motor oil #30 at room temp.

Gearmotor

40W

60W

90W

90W

volt, ph. & hz. as required

Head/Tail Pulley Dia.

120㎜

120㎜

200㎜

200㎜

yoke/chain incl.

Belt Width

50㎜

100㎜

100㎜

200㎜

length from 300㎜ min. oneway

Outside

Dimension

(W x H x D)

 

390x440x355

 

390x440x405

490x610x455

490x610x555

(㎜)

 

- Pre-installation considerations

hourly peak of oil influx, sort of oil (floating, free-flowing), tank (aboveground or underground), height of skimmed oil collecting container, lowest water level, water temperature, electric voltage, etc.

 - Support stand, installation, and electric wiring: excluded from the scope of supply unless otherwise expressed in writing

 

* Options

 - Skimmer housing material: stainless steel (SS304) or power coated steel

- Belt length: min. 300㎜ (measured from the skimmer base down to the tail pulley center), in an increment of 300㎜ up to 3000㎜ (longer belt available subject to prior consultation)

- Motor electricity: 220V, 380V, 440V, 50Hz, 60Hz. Other voltage available subject to prior consultation. One phase motor comes with an illuminated rocker switch as standard while three phase motor with lead wire or terminal box only

- Motor cover: direct rainwater- and sunray-resistant

- Timer, support stand frame

 

* Applications

- Removal or recovery of various floating oil

- Oil/Water separators, wastewater treatment, carwashing plant, parking lot

- Heat treatment/quenching

- Automobile/railway maintenance workshop

- Pre-paint and pre-plate degreasing

- Foodstuff and fishery processing plant

- Part washing tank/pit, metal forming coolant tank

- Steel mill, iron mill, oil refinery, chemical plant, oil reservoir

 

* You will find more information at our website www.kum-in.co.kr.

* For technical improvement, design and specifications are subject to change without prior notice.

 

Image
Company
KUM-IN CORPORATION

KUM-IN CORPORATION

Country South Korea South Korea

Supplier Grade level3

President
KIM CHUL BOK
Address
No.103 Daeryung Technotower, 493 Gasan-dong, Geumcheon-gu, Seoul, 153-774 KOREA
Product Category
Industrial Supplies,Chemical Machinery Equipment,Water Treatment
No. of Total Employees
1-50
Company introduction

Dear Customers,

Welcome to our website!

Our company has manufactured and exported quality oil/water separation equipment and associated products since 1989.

Especially our multiple-belt oil skimmers 'KOS-B-SR-MT series' are enjoying a good reputation among overseas and domestic steel and iron mill customers for the unique stable and state-of-the-art design based on the advanced technology through the continuous technical development supported by ample field expertise in the arena of oil-water separation of over 20 years.

Our OILSEIZER® products are briefly summarized as below:

 

  1. Belt-Type Oil Skimmers Basic Model (Small Size O/W Separator included)
  2. Belt-Type Oil Skimmers Model OSS-B (formerly Small Oil Skimmers)
  3. Oil Scum Skimmer (formerly Scum Skimmer)
  4. Multiple-Belt Oil Skimmer
  5. Oil/Water Separators, Pack-Type
  6. Integrated Oil/Water Separators, Pack-Type
  7. Centrifugal Soild/Liquid Separators 'sludgeFREE'

We always do every efforts to meet customer needs in terms of quality, pricing and service.

Any inquiry you make will attract our prompt attention. We hope to have an opportunity to work with you in the near future.

Again, thank you!

Kum-In Corporation

103 Daeryung Technotower-5, 493 Gasan-dong, Geumcheon-gu, Seoul 153-774 Korea

E-mail: info@kum-in.co.kr

Website: www.kum-in.co.kr

Phone: 82-2-2107-7685/6. Fax: 82-2-2107-7687

* OILSEIZER® and SOLIDSEIZER® are registered trade marks of Kum-In Corporation.