Introduction

Non-combustibility tester measures fireproof performance and combustion characteristics of construction materials.

It measures flammability and combustion characteristics of homogeneous construction materials and inhomogeneous construction materials which are real components. Also, using the tester to define the fireproof p erformance of homogeneous building materials and inhomogeneous building materials which are real components.  

 

▣ ISO 1182 : Reaction to fire tests for building products -Non -combustibility test

▣ KS F ISO 1182 : Method of non-combustibility test of building products

▣ KS F 2271 : Testing method for incombustibility of internal finish material and element of buildings  

 

Features 

▣ Single Zone Furnace that can be operate dup to 900 ℃ using NIKROTHAL Ribbon Heater

▣ Automatic temperature control of 750 ± 5 ℃ using power automatic regulator (TPR)

▣ Furnace that is easy to maintain, manage and replace

▣ Automatic up/ down transfer device for accurate test specimen position and user's convenience

▣ Mirror to observe the ignition ability of the test specimen

▣ Interface used RS 232C communication and DAQ board

▣ Perform automatic test by DAQ board and PC

▣ Over-current shut-down device by Alarm Temperature for user's safety

▣ Software (Non-Comb) which enables accurate data result and report based on each standard.

 

Test Result 

▣ Mass Loss (g) and Rate(%)

▣ Ignition Time (s) and Sustained Flaming (s)

▣ Initial & Maximum Furnace Temperature(℃)

▣ Final Furnace Temperature(℃)

▣ Maximum Specimen Center Temperature(℃)

▣ Final Specimen Center Temperature(℃)

▣ Furnace Temperature Rise(℃)

▣ Specimen Center & Surface Temperature Rise(℃)

▣ Differential Test Result by Standards (ISO 1182:1990,

KS F ISO 1182: 2004, IMO FTP Code Pt.1: 1998, KS F 2271: 1998)