Exhibition

Style NEO - A22C (FFF type Desktop 3D Printers)

Negotiable Pieces | Min Order Quantity Unit
Required
Quantity
Place of Origin
South Korea
Brand name
Cubicon
Payment Terms
T/T
Production
method
OEM,ODM
Shipping /
Lead Time
Negotiable / Negotiable
Keyword
desktop 3d printer, style neo, fff 3d priter, cubicon 3d printer,
Category
Other Consumer Electronics

2 Cubicon.INC

Supplier Activity

tradeKorea provides seller activity to buyers throu gh seller evaluation and measurement according to each item.

  • Country

    South Korea South Korea

    Verified Certificate

    • KITA
    Product name Style NEO - A22C (FFF type Desktop 3D Printers) Certification CE
    Category Other Consumer Electronics Material -
    Keyword desktop 3d printer , style neo , fff 3d priter , cubicon 3d printer Unit Size 530.0 * 570.0 * 680.0 mm
    Brand name Cubicon Unit Weigh 40 kg
    origin South Korea Stock 50
    Supply type OEM,ODM HS code 8477591000
    Product Information

     

     

    Style NEO

    Was the small 3D printer annoyed?

    Experience high-quality output
    with the best-in-class size (220X220X220mm)

    “Style NEO”     








    Greater output size allows a larger 3D model to be printed at once
    With the new Build Size lineup, the Cubicon Style NEO-A22C has expanded the bed size as well as has increased output volume by approximately 324% compared to Style Plus-A15CR. Depending on your purpose, you can print more various sizes of 3D models.
     
    Real-time monitoring and remote control with a built-in camera
    With the built-in camera inside the Cubicon Style NEO, you can check the output process not only on the touchscreen at the front but also on your computer or smartphone. Also, if an output error or failure is identified, the output situation can be controlled through network remote control. (power stop and restart, etc.)
    * Network remote control will be applied upon completion of development.

    Auto-Leveling Plus creates high-quality output
    The flatness of the bed on which the build is printed and the spacing between nozzles are important factors in determining the quality of the output.
    Style NEO delivers Auto-Leveling with the error precision within 10μm by applying the industrial load cell, it reduces height error failures during printing and provides the user with the best-in-class output quality.

    An easy detachment of output with the specially coated heating bed with insulation
    The heating bed of CUBICON Style NEO is specially coated to allow the output to start immediately without separate adhesive or masking tape, as well as to be easily separated after the output, providing the best output quality.
    It's guaranteed. Besides, thermal efficiency was improved by applying insulation to the bottom of the heating bed.
     
    Enhanced usability with stainless nozzle kit
    Equipped with the stainless nozzle kit patented by Cubicon has enhanced usability and minimized the probability of failure. Different from a typical nozzle kit with a tube attached, it is connected with a stainless steel pipe to provide excellent performance even in hot output materials.
    * To maintain quality and minimize maintenance, it is recommended that filaments from other companies are separated from the extruder and used.

    First in Korea, equipped with the self-designed replaceable Nozzle Kit Extruder
    Most output problems can be easily maintained by simply replacing the nozzle kit fitted to the Extruder, so it is designed to make it easy for anyone to attach/detach the nozzle kit without extruder disassembly, even if an extruder replacement is required.
    As it is self-replaceable without waiting for customer service, it reduces maintenance costs and allows output without time-consuming.

    The automatic filament feeder with built-in two rollers
    The automatic filament feeder with built-in two rollers allows a more stable filament supply to significantly improve ease of use. In addition, with the contactless optical sensor, it automatically stops the output when there is a supply problem due to filament exhaustion or breakage and reduces output time and saves material waste dramatically by allowing the output to continue when reconnected.

    * To maintain quality and minimize maintenance, it is recommended that filaments from other companies are separated from the extruder and used.
     
    Various filament outputs are available with a single extruder
    Cubicon Style NEO allows you to print ABS, PLA, PETG, and TPU filaments, as well as special engineering featured filaments, such as low-shrinkage ABS, high-strength PLA, and PC with a single extruder, giving customers the convenience and a great opportunity to experience a variety of materials.

    Applied the NFC system that automatically recognizes the filament type
    You can check the type and usage of filaments through the NFC system. Depending on the filament type recognized, the service temperature (nozzle, bed) is automatically set to prevent material-specific output conditions from failure. In addition, the user can easily check the usage of the filament on the front touchscreen and replace it at proper timing.
    * This function is available when using a Cubicon filament that applied the NFC.
     
    With the power failure compensation feature, uninterrupted output even after power-off
    The Cubicon Style NEO uses the power failure compensation feature to prevent data damage and output errors that may occur in the event of a power outage or accidental work stop. (the power requires to be recovered in 5 minutes)
    As the MCU Board always monitors the nozzle position, it can continue high-quality output even after the power disconnecting of the 3D printer.
    * Depending on the material or model, it may be difficult to resume the output due to the lifting caused by floor shrinkage.
     
    Enhanced output stability with the belt idler and cable carrier.
    The Cubicon Style NEO has applied a cable bear with industrial facility specifications to prevent free movement and twisting between cables. Also, by applying a belt idler, which is an essential part of a large 3D printer, maintains consistent belt tension for a long time to ensure high-quality 3D printing.

    Chamber-type structure of the aluminum frame improves output stability

    With a chamber-type structure of the aluminum frame, Cubicon Style NEO improves output stability by blocking external influences. A sealed structure that minimizes internal vibration and output noise allows users to use the 3D printer comfortably at home, in private offices, or in educational environments.
     
    3 layered Air Filter for Safe Printing Environments
    Equipped with the triple-clean filter (Hepa, Carbon, Purafil Catalyst Filter) of High Vision Systems that acquired major Korean and international certifications (CE, KC, FCC, etc.), it blocks dust, gas, and odors generated during the FDM 3D printer printing and makes printing safer.

    Easy and fast output by connecting dedicated slicing S/W and Wifi
    The free slicing SW 'Cubicreator' optimized for the Cubicon 3D printer provides faster and more accurate printing experience with an upgraded option setting and interfaces for user's convenience.
    In addition, by connecting the PC running the slicing SW and Cubicon Style Neo via Wifi, making output quick and easy without USB.

    7-inch touchscreen equipped with user-centered GUI
    The 7-inch full-color touchscreen with Korean∙English UI allows even beginners to easily operate it and to check the various information (output status, equipment information, material information, printer information, etc.) simply.

     

     

     

    B2B Trade
    Price (FOB) Negotiable transportation Express,Ocean Shipping,Air Transportation,Negotiation Other
    MOQ Negotiable Leadtime Negotiable
    Payment Options T/T Shipping time Negotiable

    2 Cubicon.INC

    • Country

      South Korea South Korea
    • Supplier Activity

    • President

      Doowon Choi

    • Address

      527 Dunchon Daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea

    • Product Category

      Other Consumer Electronics

    • Year Established

      2017

    • No. of Total Employees

      1-50

    • Company introduction

      Cubicon started with the goal ofcontributing to individuals and companies engaged in creative developmentactivities. Cubicon derives from two words ‘Cubic’ meaning regular hexahedronin a perfect form and ‘On’ which means activation and vitalization. Itsignifies that all objects can be configured perfectly by Cubicon. Based on HyVISION’s precision equipment manufacturingtechnology and experience, the company believes that it can contribute to andcan do better than other competitors in the 3D printer field.

      It offers unlimited services in the fieldof 3D Printer, Materials, Software, 3D printing, and is aiming to become theTotal 3D Printing Solution Provider. It seeks to more easily and quicklyutilize 3D printers and study core technologies by integrating varioustechnologies. In the last 5 years, it has developed 3D printers in-house andsupplied more than 10,000 units in Korea contributingto the spread of 3D printers. It holds a perfect 3D printer with an auto-levelingsystem, special coating bed technology, and triple filter applied based onvision recognition and precision movement control technology from HyVISION, a parent company, and are developedindependently. Cubicon leads 3D printers manufacturing due to its technologicalsuperiority. 

    • Main Markets
      • Canada Canada
      • Germany Germany
      • U. Kingdom U. Kingdom
      • Netherland Netherland
      • Singapore Singapore
      • Turkey Turkey
      • Viet Nam Viet Nam
    • Main Product
      • Style NEO _ A15CR _FFF type Desktop 3D Printers_

        Style NEO - A15CR (FFF type Desktop 3D Printers)


      • Style NEO _ A22C _FFF type Desktop 3D Printers_

        Style NEO - A22C (FFF type Desktop 3D Printers)


      • Style NEO _ A31C _FFF type Desktop 3D Printers_

        Style NEO - A31C (FFF type Desktop 3D Printers)

    • Attached File

      Cubicon_Produt leaflet_En_Cubicon_200809.pdf

      Cubicon_Company Profile and Business Proposal_2021.pdf

    • Verified Certificate CE
    • Other Products from This Supplier

      Style NEO - A15CR (FFF type Desktop 3D Printers)

      Style NEO - A31C (FFF type Desktop 3D Printers)

    • Related Products

      TEATIME A1_SELF-SERVE HOT & ICED CAFE MACHINE with various cashless payment system

      A.T.T 6 Zone Mixing Amplifier ZONE-120M/240M/360M/480M/600M

      REPELLO ( Electronic Mosquito Reppeller )

      Multy Fuction Hearing Neck Loop

      Body Dryer - Oz Wind

    • TRADE SHOWs "Yongin untact Video Meeting"

      RRe Ice Cube Tray

      FOOD CONTAINER TRITAN

      Chef's ware Spin Lock Clear

      cocod'or Reed Diffuser

      ECONOMIC FOOD CONTAINER

    • Other Products viewed with This Product