HANA H2001 is a high-quality Top Feed Type injector for passenger cars. For an easy installation, you can either use a single-type and rail type injector (2, 3 & 4 cylinder aluminum or plastic rails). It has excellent advantages in terms of low noise level, heat resistance, and control of flow rate with the use of calibration nozzles (B, C & D type). We guarantee the best performance and reliability for constant flow rate maintenance according to continuous use.

[APPROVED PERFORMANCE] Hana injectors comply with EURO-6 emission regulations and consistently inject the correct amount of gas fuel into each engine cylinder to promote smooth engine operation and a balanced fuel supply to ensure optimal performance.

[PREMIUM QUALITY] Innovative design solutions and excellent stainless steel and rubber materials for corrosion resistance and low temperature conditions ensure improved operating performance and body strength, and a long service life.

[STANDARDS & APPROVALS] HANA H2000 injector has been approved under approval No. E4 67R-010213, E8 110R-004686 and meets the requirements of UNECE Regulations. HANA is also certified to the international standard of ISO 9001, ISO 15500-7.

[WIDE CONFIGURABILITY] Wide configurability of injectors flow rates provides installers with opportunities in terms of selection. A distinction is made between the 'GOLD' UNI injectors of type A, where the flow can be reduced to type B/C/D by using screw-in nozzles, and the 'BLUE' ones of type A+, which are mainly used for more powerful engines.

[24-MONTH WARRANTY] The injector guarantees 40,000 miles driving performance, and in the event of failures such as ignition failure, breakdown, or stop working, we provide a REPLACEMENT service within the warranty period through cause analysis.

HANA lpg & cng H2001 Injectors fit passenger car 

Features

· Quantity: 4 or 6 lpg & cng Injectors

· Condition: 100% HANA BRAND

· O-Rings Included: Yes, preinstalled

· Injector Design: Top feed type

· Connector Type: AMP superseal 2-way connector [AMP 282104-1]

· Filter Design: Basket filter design at inlet [no filter with hose type]

Specification

· Voltage: DC 12V

· Coil Resistance: 1.3 Ohms / 1.9 Ohms / 3.0 Ohms 

· Static Flow Rate:  AA type 130L/min / A type 120L/min / B type 90L/min / C type 75L/min / D type 65L/min

· Opening time: 2.1ms, 1.3 ohms / 2.16ms, 1.9 ohms / 2.64ms, 3.0 ohms

· Closing time: 1.2ms, 1.3 ohms & 1.9 ohms & 3.0 ohms

· Control current: peak 4A / hold 2A

· Operation pressure(gauge): 1.2bar

· Max open pressure: 3.5bar

· Operating Temperature: -40℃(-40℉) to 120℃(248℉)

· Length: Rail 2.75" (70mm) / Hose 3.35" (85mm)

· Package Includes: 4 x Injectors / 6 x Injectors

· Operating Gas: LPG / CNG / LNG