Slip Type Coupling 2~4 Locks are composed of two, three, or four pieces of casing and a lock part at each end. They have better tightening capabilities and a wider coupling range. They are easy to install even on large diameter pipes. Slip Type Couplings have no axial resistance and function only to seal the space between pipes.

Pipes should be fixed adequately to avoid fall-out caused by axial force

- MJD 13A~1000A / MJDL 15A~1000A - for mid pressure

- MJDF / MJDFL 65A~1000A - for higher pressure

- MJT / MJTL / MJTF / MJTFL 1100A~1500A

- MJF / MJFL / MJFF / MJFFL 1600A~4000A

- The assembly type saves work time.

- Applicable to various pipe materials, even connects pipes made of different materials (e.g., steel pipe + PVC pipe).

  ; steel, stainless steel, copper, Cu-Ni, aluminum, iron, PVC, PPR, PE, fiberglass, etc.

- Applicable to various pipelines - water, air, steam, vacuum, oil, gas, chemical, etc.

- No preprocessing is required at pipe ends. (no grooves, no threads, etc.).

- Using a (torque) wrench to install eliminates worry about fire.

- Rubber gaskets accommodate vibration, impact, noise, angular deflection, and gap between pipe ends.

- Installation is done on one side. This enables products to be stored or work to be done in a narrow area.

- Grip type couplings resist axial movement.

- Slip (flexible) type couplings allow pipe expansion and contraction.

- Couplings can be assembled and disassembled several times.

SUS = STS = stainless steel

JWC standard materials in bold

* Gaskets should be selected according to the fluid type, temperature, etc.

* Users should test the suitability of gaskets under their specific operating conditions.