EPT3600 Series High-intensity Rack-mount OLTMain Applicationwidely applied on the networks of the carriers EPON in the NGB upgrade of the Broadcast, TV and film system automatic power distribution, power-consumed information  collection and FTTH in the electric power industry AttributesEPT3608EPT3612EPT3616System Capacity Maximum coupling ratio: 1:64backplane bandwidth: 128GMAC table capacity: 32KInterfacePON8 EPON interfaces12 EPON interfaces16 EPON interfacesUplink interface8 GE ports (4 Gigabit optical ports, 4 Gigabit combo SFP/TX ports)P36XX-2TE supports 2 10G interfaces Attributes of the PON InterfaceA 1Gbps transmission rate with downlink and uplink symmetryAverage emitting power of the PON port: +2dbm ~ +7dbmLight reception sensitivity of the PON port: no less than -30dBmSecurity: ONU authentication mechanism StandardsIEEE802.3ahIEEE 802.1D, Spanning TreeIEEE 802.1Q, VLANIEEE 802.1w, RSTPIEEE 802.3ad physical link static/dynamic aggregation (LACP)Ethernet – IIQoSBackpressure flow control (half duplex)IEEE 802.3x flow control (full duplex)IEEE 802.1p, CoSWR, SP and FIFOLimiting the uplink/downlink rate based on each ONUSupport DBA and SLAVLANPort-based VLANSupport QinQ and flexible QinQLayer-3 functionssupport static routing, Ripv1/v2 and OSPFHost routing capacity: 8KMulticastIGMPIGMP SnoopingReliabilityUnidirectional Link Detection (UDLD)Hot swap of the EPON optical module on the expanded slotOptical path protection of EPONAbnormal luminescence ONU detection such as long luminescenceNetwork SecurityLimiting the maximum number of users on each portPort isolationPacket storm controlFlow-based ACL access control functionTransmission data encryption on the PON interfaceConfiguration ManagementVarious management modes such as CLI, Web, SNMP and TELNETConducting software upgrade through TFTP and FTPCommand prompt in English or in ChineseDebug outputPhysical CharacteristicsDimensions mm (W×D×H): 442 × 315 × 44Installation: standard 19-inch cabinetWeight: 2kgEnvironmentOperating environment: 0℃-55℃; 10%-85% non-condensingStorage environment: -40℃-80℃; 5%-95% non-condensing Power SupplyInput voltage: AC90~264V, DC -36 ~ -72VSupport dual-power input, DC/AC power supply and hot-swapSupport over-current protection and over-voltage protection