Product overview

NFC series are dust collectors that take in and purify fume, gas, dust, etc. created during welding work before they are scattered.

They have automatic filter cleaning system based on air pulse jet system, which maximizes dust collection efficiency through automatically cleaning contaminants, etc. accumulated on the filters, enables 24/7 operation, and extends filter life.

They have carbon filters at their rear end part for removing odor of welding gas, etc. Therefore, they are suitable for removing contaminants and odors created during such works as welding, finishing, soldering, etc. 

Applications

These products are suitable for work sites where welding work, powder work, measuring work, etc. is carried out.

Special cartridge filter dedicated to fume collection

This product features a high dust collection efficiency of no less than 99.98% based on the filter to which special surface coating is applied.

External joint-type flexible arm hood 

This product features a flexible arm hood that has external control joint. Therefore, there is no air resistance inside the hood, the dust collection efficiency is high, and the operating noise is small.

Deodorization with carbon filter

This product is designed to have a carbon filter that removes odor of welding gas, etc. Therefore, it can be used for welding, finishing, and soldering work.

Automatic filter cleaning system (air pulse jet system)

The air pulse set system automatically blasts high-pressure air for dedusting the filters, which increases dust collection efficiency, enables 24/7 operation, and extends filter life.  The operating time of the air pulse jet system can be adjusted at the operator's discretion.

Digital monitoring and control system

This product features a digital monitoring and control system that enables monitoring and controlling of the differential pressure at the filters, the replacement cycle of the filters, and the operation of the air pulse jet system. The digital monitoring and control system also automatically detects the cleaning and replacement cycles of the filters, and prompt them with alarm sound or lamp, so that customers can use the product safely and conveniently.

High-efficiency fans of dedicated design

This product features strong suction force and low-noise operation, because it has high-durability high-efficiency turbo fans.

High mobility and space utilization

This product has wheels for easy movement to and installation at desired locations. After movement, it can be fixed firmly with wheel brakes. In addition, it has high space utilization, because it can be installed at small spaces based on compact design (in case of indoor type).

Digital differential pressure gauge

This gauge enables the identification of contaminants, replacement timing of the filters, etc., so that the operator can manage it safely and conveniently.

Automatic shut-off function for equipment protection

When it is necessary to replace or clean the filters, this function automatically shuts off the product for protecting it, and sounds buzzer for alarming.   (In this case, the product operation is resumed when the filters are replaced or cleaned.)

Easy maintenance

This product is designed for easy maintenance by mounting the devices requiring maintenance such as the filters, the air pulse valves, and the air tanks to the front of the product. In addition, the filters can be replaced easily without any tool.

Automatic dedusting function after operation

After the operation of the product is completed (fan motor off), the air pulse jet system automatically cleans the filters, which increases dust collection efficiency, and extends filter life. (The dedusting time can be adjusted.)

Filters of maximized filtering area

The filters are made of polyester fabric that has a high frictional strength and tensile strength. With the cartridge-type design having maximized filtering area, the filters can collect fine scattered dust.

Easy disposal of dust

This product is designed to have a structure that collects dust removed from the filters in a drawer-type dust box or a cylindrical one-touch detachable box installed at the bottom of the product, which enables easy disposal of dust without worries about secondary contamination. 

※ NFC series : Cartridge Filter.  

※ WFC series : 1st Demister Filter, 2nd Medium Filter, 3rd Carbon Filter

※ Input Power : 220V, 380V, 440V / 3Ø / 50Hz

※ These specifications can be revised for improvement of quality without a notice.

※ These specifications describe standard products, but all customized dust collectors are available for customers’ needs.