Characteristics of Dentis
Implant System

1. Surface Treatment

1. Surface Treatment
Usign RBM Treatment, the surface of the implant is blasted using CaP powder to increase cohesion of osseo tissue, followed by thorough cleaning of the surface. The Roughness is 1.5+/-0.4um and the surface magnification power is about 192% after surface treatment.

Dimensional Interactive Display

2. Condition of Surface

3. Analysis of the Elements on the Surface

Because of the exposure of the titanium to the air, detergent and remaining cutting oil, various organic matter 0.3 to 1nm on the surface of the dental implant and present. In addition, the existing elements such as Ca, P, N, Si, S and Cl can be identified even though there might be minute traces of them. The small quantities of the above elements and organic matter is not reported to harm the human body yet. However Dentis Company controls its washing process to minimize any residue and proves its washing validity through testing sample of the surface of every lot number which we produce.

2. Cleaning System

→	→	→	→
Removal of Cutting Oil Stuck to the Product from the CNC Manufacturing Process	Protein Removal	Cleaning Two Times Using Neutral Detergent	Inspection of Washed Product After the Neutral Detergent Cleaning
←	←	←	←
The Result of the EDS Analysis of the Elements	Drying of Product after Cleaning	Cleaning Three Times using Distilled Water	Cleaning Three Times Using Neutral Detergent

3. Characteristics of Dentis Implant

1. The 3 types of fixture design can be used in various cases.
It's products have been developed to be applied to various clinical cases and provide 3 types of fixture, Internal, External and Submerged for parts that need esthetics and according to the condition of the bone.

2. Convenient Compatibility of Superstructure
Dentis Implant is economical to use with the certain products such as Branemark, ITI, Astra, and Swissplus implants.

3. Micro-thread for Bone Loss Prevention
Dentis Implant Micro-thread minimizes bone loss, breaking due to internal stress and appropriate stimulus of the cortical bone together with stable initial fixation.

4. Taper Design and Rotating Safe Cutting Edge for Smooth Drilling
It has beed designed for excellent osseointegration as well as excellent initial fixation as it remarkable reduces excessive friction which the bone due to uniform transmission of strength during insertion owing to Dentis fixture's safe cutting edge that follows the direction of the rotation. The cutting edge is on the whole body of the fixture and has taper design and double thread.

5. Optimum RBM Surface Treatment
Roughness measurement of the surface is Ra: 1.5~1.8um. This measurement is the most ideal value for osseointegration.

6. External Fixture Mount Used for Impression and Abutment
External Fixture Mount is economical and makes it simple for dental prosthetics, Mount could be used as Impression Coping(Transfer) and Final Abutment, after insertion.

7. Internal/Internal Submerged Fixture is a No-Mount System
During surgery, existing Mount System obstructs the range of vijsion and the distance between the upper and lower teeth, however Dentis No-mount system can immediately ensure a path during surgery and reduces operation time and attains accurate operation with no effects by the surrounding teeth.