Performance Features

JL4000L-Series specially covers a wide range with the control of Door thickness. The customer is usually easy to manage the door thickness without separating from outside lever.

Heavy duty rotation spring extend life of lock chassis and provide smooth, fast return action of levers and minimize droop, Removable through-bolting prevents lock chassis rotation and disengagement from latch.

Cold rolled steel, machined, threaded hubs and threaded rose support plates prevent loosening of the lockest by bolting chassis to the door. Large diameter of mounting plate and rose covers new ANSI hollow metal.

Flat Rose("L" Lever Type)

1. Push in and turn button function
2. Individual spring on each side to prevent lever sag. maintain reliability, reduce maintenance.
3. UL Listed 3 Hour Rated 1/2" Throw deadlatch completely reversible for flat & beveled doors
4. Easily adjustable for Door Thickness
5. Solid brass 6pin "C" keyway cylinder
6. Concealed screw mounting
7. Cylindrical Body
8. Optional removable Thru Bolt can be set to fit all major manufacturers THRU BOLD locations.

Round Rose("L" Lever Type)

1. Push in and turn button function
2. Individual spring on each side to prevent lever sag. maintain reliability, reduce maintenance.
3. UL Listed 3 Hour Rated 1/2" Throw deadlatch completely reversible for flat & beveled doors
4. Easily adjustable for Door Thickness
5. Solid brass 6pin "C" keyway cylinder
6. Concealed screw mounting
7. Cylindrical Body
8. Optional removable Thru Bolt can be set to fit all major manufacturers THRU BOLD locations.

Specification

Applications	For offices, schools, hospitals, apartments, hotel/motel and other public buildings.
Door Range	1-3/8" to 2" thickness doors
Backset	2-3/4" standard, 2-3/8" optional
Face Plate	1-1/8" x 2-1/4" square corner, beveled, for 2-3/4" backset standard Optional 1" square corner, beveled, for 2-3/8" backset
Strike	ASA Strike standard, "T" and full lip strike available on request
Latchbolt	1/2" Throw solid brass, reversible for RH or LH applications, UL Listed.
Latch and Stick Screws	8-32 x 1" PFH dual purpose
ANSI Standards	Meets or Exceeds requirements of ANSI/BHMA A156.2 Series 4000, Grade 2, 400,000cycles.
Exposed Trim	Wrought brass and bronze, stainless steel rose, Rose diameter 85mm standards Levers are pressure cast zinc, plated to match finish symbols
Keying	6-pin solid brass "schlage C" Keyway cylinder, 2 keys per lock. Keying as per individual job requirement
Tactile & Lead Lining	Available upon request

Finishes Available

Dimensions
The lever features a 3/8" return and projection of 2-12" from the face of door

Certifications Compliance

Functions - ANSI 156.2 Series 4000 Grade

Keyed Functions
	Entrance Lock Turn/Push button locking. Pushing and turning button locks outside lever requiring use of key until button is manually unlocked. Locks outside lever until unlocked with key or inside lever is turned.
	Entrance Lock/Office Lock Locks outside lever until unlocked with key or inside lever is turned
	Classroom Lock Dead locking latch bolt operated by lever from either side except when outside lever is locked from outside by key. When outside lever is locked, latch bolt is operated by turning inside lever.
	Storeroom Lock Outside lever fixed. Entrance by key only. Inside lever always unlocked.
Non-keyed Functions
	Passage set latch Bolt operated by lever from either side at all times.
	Bath/Bathroom Privacy Lock Latch Bolt operated by lever from either side. Outside lever is locked by push button inside and unlocked by emergency release outside. Turning inside lever or closing door release push button.
	Dummy Lever Single dummy trim for one side of door. Pull only
	Exit Lock Blank plate outside. Inside lever always unlocked.
This icon designates designs available with interchangeable core options.