Solenoid Valve

Materials of Construction

Solenoid housing and valve manufactured from 316L stainless steel as standard.
Valve seals are supplied in Viton as standard. Alternative elastomers available for extreme conditions and to suit media.
Springs are manufactured from 302S26 & 316S42 stainless steel as standard.
Fasteners are metric A4 18/10 grade stainless steel; equivalent to 316 grade stainless steel.

Technical Data

Operating Performance for FP03P, FP06P, FP10P, FP12P, SJ06, S06/S09/S12 & SPR
Duty cycle 100% continuously rated/energised.
Surge suppression diode is fitted on all Ex d dc solenoid coils as standard.
Response times - pull in <100ms, drop out <70ms.
Solenoid Insulation - Class H.
Pull-in volts to 85% of nominal. (Checked at FAT to be within specified limits to guarantee safety factors).
Maximum volts at 110% of nominal.
Drop-out volts typically 10 - 20% of nominal (higher Volt options for line monitoring). (Checked at FAT to be within specified limits to guarantee safety factors).
Temperature rating -20°C to upper limit of solenoid classification (standard). Arctic service option to -60°C.
IP66 & IP67 Ingress Protection to IEC 60529 and NEMA 4X.
Bifold solenoid valves must be installed, operated and maintained in accordance with the relevant Bifold installation, operating
and maintenance instructions, relevant installation rules, regulations and codes of practice.