Conductive foil tape with mylar film is a any metal foil or fabric (such as tinned copper foil,copper foil,aluminum foil) with mylar PET film that allows for high temperature adhesion to withstand curing after painting, or wrap the cable and so on.

The tape provides a conductive, non-corroding surface when applied to clean metal frames, doors, or panel surfaces where electrical conductivity is required.

If you need peel off the Mylar,the release mask is easily removed from the foil layer after painting. The remaining foil leaves a clean, electrically conductive path as a mating surface for an EMI gasket.

*simple installation
* eliminates plating the entire cabinet
* can provide die-cut shapes (see above photo)

If you don't need peef mylar off, we also can supply this kinds of tapes.

Following is introduce of painting

Application instructions
1. Conductive surface must be clean and free of any residue
2. Apply release mask tape by removing protective paper backing. Press firmly to ensure good adhesion. Avoid removal and repositioning. Allow one hour for bonding prior to additional processing.3. Application temperature can be 225C 4. Full adhesion is achieved after 24 hours