The mushroom anchor-IJIN A038

Product name	The mushroom anchor-IJIN A038	Certification	-
Category	Anchors	Ingredients	-
Keyword	anchor , mushroom anchor , ship anchor , mooring anchor	Unit Size	-
Brand name	-	Unit Weigh	-
origin		Stock	-
Supply type	-	HS code	-

Product Information

IJIN MARINE LIMITED is the biggest trader of hardware for ship in China, including anchor, anchor chain, steel wire rope,equipment,etc.

For one hundred forty years, harbormasters have relied on mushroom anchors for permanent moorings.We sell U.S. made all steel mushroom moorings. Steel has the property of bending rather than breaking and allows 100% welded consruction.In addition they have the advantage of 30% counterweighting,a more aggresive biting edge,and a larger bell diameter that greatly improves holding power.The weighted head also boasts a stronger eye insuring longer-life and the shaft will stay on the bottom keeping the chain from wraping around it.

We have found that our anchors provide more holding power than a Pyramid and up to 25 percent more than a traditional mushroom.One of our anchors properly set will have a holding power of about 10 times the weight.

The mushroom anchor is suitable where the seabed is composed of silt or fine sand. It was invented by Robert Stevenson, for use by an 82-ton converted fishing boat, Pharos, which was used as a lightvessel between 1807 and 1810 near to Bell Rock whilst the lighthouse was being constructed. It was equipped with a 1.5-ton example.

It is shaped like an inverted mushroom, the head becoming buried in the silt. A counterweight is often provided at the other end of the shank to lay it down before it becomes buried.

A mushroom anchor will normally sink in the silt to the point where it has displaced its own weight in bottom material, thus greatly increasing its holding power. These anchors are only suitable for a silt or mud bottom, since they rely upon suction and cohesion of the bottom material, which rocky or coarse sand bottoms lack. The holding power of this anchor is at best about twice its weight until it becomes buried, when it can be as much as ten times its weight [3]. They are available in sizes from about 10 lb up to several tons.

EXCELLENT FOR PERMANENT MOORINGS, CHANNEL BUOYS, AND OTHER NAVIGATION AIDS. THIS STYLE TAKES FIRM HOLD AND REMAINS FIXED UNDER ADVERSE CONDITIONS. AS IT OSCILLATES UNDER STRAIN IT BURIES ITSELF DEEPER. ALSO SOME LARGE USED AVAILABLE AS WELL!

IJIN MARINE LIMITED is the biggest trader of hardware for ship in China, including anchor, anchor chain, steel wire rope,equipment,etc.

For one hundred forty years, harbormasters have relied on mushroom anchors for permanent moorings.We sell U.S. made all steel mushroom moorings. Steel has the property of bending rather than breaking and allows 100% welded consruction.In addition they have the advantage of 30% counterweighting,a more aggresive biting edge,and a larger bell diameter that greatly improves holding power.The weighted head also boasts a stronger eye insuring longer-life and the shaft will stay on the bottom keeping the chain from wraping around it.

We have found that our anchors provide more holding power than a Pyramid and up to 25 percent more than a traditional mushroom.One of our anchors properly set will have a holding power of about 10 times the weight.

The mushroom anchor is suitable where the seabed is composed of silt or fine sand. It was invented by Robert Stevenson, for use by an 82-ton converted fishing boat, Pharos, which was used as a lightvessel between 1807 and 1810 near to Bell Rock whilst the lighthouse was being constructed. It was equipped with a 1.5-ton example.

It is shaped like an inverted mushroom, the head becoming buried in the silt. A counterweight is often provided at the other end of the shank to lay it down before it becomes buried.

A mushroom anchor will normally sink in the silt to the point where it has displaced its own weight in bottom material, thus greatly increasing its holding power. These anchors are only suitable for a silt or mud bottom, since they rely upon suction and cohesion of the bottom material, which rocky or coarse sand bottoms lack. The holding power of this anchor is at best about twice its weight until it becomes buried, when it can be as much as ten times its weight [3]. They are available in sizes from about 10 lb up to several tons.

EXCELLENT FOR PERMANENT MOORINGS, CHANNEL BUOYS, AND OTHER NAVIGATION AIDS. THIS STYLE TAKES FIRM HOLD AND REMAINS FIXED UNDER ADVERSE CONDITIONS. AS IT OSCILLATES UNDER STRAIN IT BURIES ITSELF DEEPER. ALSO SOME LARGE USED AVAILABLE AS WELL!

B2B Trade

Price (FOB)	Negotiable	transportation	-
MOQ	Negotiable	Leadtime	Negotiable
Payment Options	Negotiable	Shipping time	Negotiable

Ijin Marine Limited

Minisite Heart

Country / Year Established: China / 2010

Membership: BIZ

Business type: Manufacturer

12

President: Bill Jia

Address: 603,No2,Lane 138,Rushan Road,Shanghai,China

Product Category: Other Machinery Parts,Steel Wire,Valves

Year Established: 2010

No. of Total Employees: 1-50

Company introduction: <p>Ijin Marine Limited, born in Hong Kong, is a hardware supplier and marine service agent in China. In around 90 sea ports and river ports of China, Ijin can directly deliver on board steel wire rope, anchor, anchor chain, pump, valve, lashing material, ship outfitting, and hardware, etc. In the past 2 years, Ijin has delivered 1,000.00 tons of wire rope, anchor chain, etc in 30 ports such as Xingang, Nantong, Lanshan, Zhanjiang, Bayuquan, Fangchenggang, etc. Thanks to our staffs’ hard work and kind cooperation of 300+ vendors, now Ijin has developed to be a reliable hardware supplier for commercial ship, tug boat, cruise vessel, naval vessel, etc. Not only supplying, Ijin also trades above hardware to other countries Malaysia, Germany, USA, UAE, India, etc.

As an agent, Ijin provides 50 kinds of marine service in 300+ ports, 80 countries. In our database, Ijin has more than 2500 suppliers, repairers, dockyards, etc in the world. So far, in at least 20 ports, Ijin has delivered service life saving inspection, fire fighting inspection, radio inspection, underwater hull cleaning, wire rope delivery, store, spare part and provision supplying etc, for more than 15 ship owners of China, India, Taiwan, UAE, etc. Ijin moves fast enough to follow your vessel schedules every 24 hours and 7 days. In Sudan, Sierra Leone, Togo, or any other port in the whole world, Ijin always stands with you.