We are the manufacturer for the Auto-Sensor sanitary toilet seat & sanitary roll (HDPE film) in Korea and we started manufacturing sanitary toilet seat from Jan. 2003 after research & development for 5 years.
Now we are looking forward to entering your market with our products in case you are interested in ours.

When was the last time you felt comfortable about sitting on a public toilet?
It's an established fact that people are afraid to sit on public toilets.
It's a risk people prefer not to take. Medical studies show that dangerous bacteria, including hepatitis and herpes can be found on the toilet seats of public and commercial restrooms.
Once possible solution is a new and revolutionary idea called CLEAN COVER!
With the simple wave of hand, the Clean Cover Toilet Seat provides a fresh, clean, hygienic seat cover for each individual user.

1) Power: 6~12V Adapter or battery
2) Dimension: 450mm * 520mm * 150mm
3) Drive : 6~12V D/C geared motor
4) Components
- The seat-ring encased in a Cover200 plastic sleeve film
- Motor module to drive the reels
- The two reels to feed and rewind Cover200 plastic sleeve film.
- The housing separated upper and lower contains the reels and power module
- The seat-ring is attached to lower housing
5) Operating
when activated by the wave of a hand on the housing cover mounted sensor, Seat300 dispenses a sleeve film from the fresh Cover200 roll. At the same time, the used sleeve film is cut as it is drawn onto the rewinding reel in the housing It is easy, touch free!
6) Replacing Cover200
Replacing Cover200 sleeves is very easy. When the roll of clean Cover200 sleeves is used up, simply replace the empty roll with a new Cover200 sleeve. It takes not more than a minute and requires no special equipment of training.
Please refer to our home-page 'seat300 com' for more information on our products.