Endless battery pasting belts have been developed in close co-operation with battery manufacturers, belts come out "endless" from our production lines and need no further seam or splice.

Endless battery pasting belts are made of cotton and synthetic fibres, has the same strength in all its points and the well-known "seam break zone" does no longer exist; The belt has the same thickness and surface smoothness throughout its circumference and this means a better pasting and improved active material distribution on battery grids. Water absorption is uniform in every point of the belt since no glue is used for seam purposes; The endless belt has a remarkable stretching load, therefore its dimensional stability is excellent throughout the whole life; The belt runs straight on the pasting machine and does not move towards one side or another one because it is perfectly cylindrical; length and width do not change even under heavy working conditions, so belts can work hardly but in no case create slipping problems on the pasting machine rolls. 

The Endless battery pasting belts perform at the level of 0.8 to 1.0 million double-negative plates per belt and 1.5 to 1.7 million double-positive plates per belt.

 

Product Features:

1. Made of cotton and synthetic fibers 

2. Longer duration of the belt 

3. Higher abrasion resistance of the surface. 

4. Equal surface on the top and bottom of the belt as each belt is grinded to the measure, Equal thickness.

5. Endless, without joint – all the surface of the belt is the same.