Piezoelectric Ceramics for Atomizer

1. Dimension（mm）：Φ20.0*1.2

（Note: the thickness is determined according to the frequency of the product）

2. Product code：BT-W20-1.7JY1

(J：edge curl, Y1：Transparent bright corrosion resistant glaze）

3. Material code ：C5

4. Electrode：Ag electrode, A bright white glass glaze is attached to the surface of the vibrating electrode.

5. C5 can also be used to make other types of atomizer series

6. Note for use

6.1 The atomizer shall be firm and flat.

6.2 The atomizer should be cleaned regularly without too much scale.

6.3 Ensure that there is no potential difference in the aqueous solution to cause electrolysis

      of the atomizer electrode when designing the circuit.

6.4 When the atomization voltage Vp-p at both ends is less than or equal to Vp-105 V.

6.5 In any case, do not weld the connecting wire of the atomizer by yourself to avoid 

      damage to the product.

6.6 The atomizer is a fragile product. Strong vibration or impact may damage the atomizer.                     

      Please install it carefully.

6.7 Dry burning shall be prevented during the use of atomizing tablets to avoid 

      the decline of product performance.

The company's ultrasonic atomize sheet technology, compared with the traditional atomization

sheet with nickel or titanium as electrode, our special protective electrode has superior performance

in acid resistance, alkali resistance, cavitation corrosion resistance and brightness. 

It has the characteristics of high electrode strength, not easy to scale, long actual service life, 

large amount of atomization (especially 5V / 3mc) and good consistency.