Hiflex Metal Gasket

Hiflex Metal Gasket is made of Graphite, Metal O-Ring, Metal Clad, and Spiral Wound Gasket( or Corrugated Metal), which is the product to improve high temperature and high pressure sealing performance through high body buoyancy and recovery force even for spiral wound gasket size We can manufacture all ranged sizes of ASME/ANSI B16.47 Series "A" & "B" as well as ASME/ANSI B16.5.

Also, we can manufacture products that can be applied for flange in JIS, DIN, etc. as well as products having diameter of 3,000mm and more. It can be applied for various flanges such as Raised face, Male-Female, Tong & Groove, etc. and we can manufacture it in oval type, square type, etc. Also, it can be applied for partition bar for heat exchanger

-. Hiflex Metal Gasket Apply

• Flange Standard
  Non-standardized flange on ASME/ANSI, DIN, JIS, BS, heat exchanger, etc.

• Service Temperature
  240°C ~ 650°C

• Working Pressure
  350 kgf/cm2

-. Product Experience Hiflex Metal Gasket

1. Hiflex G-10 Series

1) Hiflex G-10

Hiflex G-10 that W type spiral wound gasket is applied can be used for narrow sealing side below ASME B16.5 NPS 4". It is the product that can be used under ultra low temperature, high temperature, and high pressure condition, which is suitable for flange's vibration, shrinkage, and expansion environment because of its excellent recovery force.

2) Hiflex G-11

Hiflex G-11 that W type spiral wound gasket is applied can be used for narrow sealing side below ASME B16.5 NPS 4". It is the product that can be used under high temperature and high pressure condition where abrasion can't be used, which is suitable for flange's vibration, shrinkage, and expansion environment because of its excellent recovery force

2. Hiflex G-20 Series

1) Hiflex G-20

Hiflex G-20 that W type spiral wound gasket is the product that can be used under high temperature and high pressure condition where abrasion can't be used, which is suitable for flange's vibration, shrinkage, and expansion environment because of its excellent recovery force.

2) Hiflex G-21

Hiflex G-21 that W type spiral wound gasket is applied is the product that can be used under ultra low temperature, high temperature, and high pressure condition, which is suitable for flange's vibration, shrinkage, and expansion environment because of its excellent recovery force.

3) Hiflex G-22

Hiflex G-22 that corrugated type metal is applied is the product that can be used under ultra low temperature, high temperature, and high pressure condition and also, it can be used in low bolt load, which is used when thin gasket that Hiflex G-21 can't be applied is requested

4) Hiflex G-23

Hiflex G-23 that corrugated type metal clad is applied can be used at a place requesting higher compression rate than that of Hiflex G-21, which exerts excellent performance in high temperature environment.