Electrodeless Hi Bay Lighting and Plant Grow Light 
  125 watt, 150 watt, 165 watt
For exchange information and market survey only

  Some of the main characteristics include:
1. Long lamp life of 60 000 hours (four times the normal service life of conventional fluorescent lamps)
2. High luminous efficacy of 80 lumens/watt
3. Instant flicker-free start; and
4. Excellent quality of light and high luminous flux.

How does it work
The high frequency electrodeless discharge lamp is made of three parts: 1. the lamb bulb, 2. the coupler 3. the high frequency power supply generator. When the power goes through the high frequency power supply generator, it creates a 2.65MHz high frequency positive power. It uses the principle that electromagnetism is coupled into the lamp bulb it responds to make the air in the bulb avalanche the electricity to form plasma. When the stimulated atoms of the plasma returns to its base state, the plasma radiates at the wavelength 254nm .Ultraviolet light is emitted which in turn excites the phosphors to create almost instantaneous light.

Best practice design and technology information
Mercury high discharge lamps
Mercury high discharge lamps are widely used in warehouses, factories and gymnasiums with high ceilings. They have a low initial cost but poor efficiency overall. In addition, they create significant disposal problems as a result of their use of the heavy metal mercury. In most situations, mercury lamps can be replaced by metal halide lamps with much improved efficiency.

Electrodeless lamps
In contrast to conventional fluorescent lamps, the electrode-less lamp generates light without electrodes in a closed 'ring' with no starting point and no end point. The energy is 'injected' via ferrite rings from outside using magnetic fields (induction principle). The lamp therefore has no points that can wear out, and last longer than conventional lamps.

Features
Long life and low degradation:
Because there is no filament or electrode, the life span will be more than 60,000 hours and Up to 100,000 hours, the average degradation rate is ＜5%.

High efficiency and energy saving:
High efficiency, it achieves ≥63 Lm/w，the power factor is more than 0.98, cosφ≥0.98, lamp power consumption ≤ 0.02 input ≈output, high frequency electrode-less discharge lamp 100W is equiv to a 600W incandescent light, under normal circumstances an 85W high frequency electrode-less discharge lamp ≈170W Metal Halide ≈250W, high pressure sodium ≈500W incandescent.

Environmental protection:
It uses encapsulated mercury, when the bulb breaks, it will not cause pollution, also it only contains 3mg mercury, while the other lights contain 14 mg mercury 99% recyclable, the whole high frequency electrode-less discharge lamp is 99.6% recyclable.

No flickering, low glare, good for eyes:
Because of high efficiency and no flickering, the light is very stable, bright, low glare.

High dependability:
The product is available in both AC and DC models. The AC voltage is in the scope from 110V to 264V, and the DC in 12 + 24 volt. The environmental temperature is between -30 to +50C.

Moment start, no warm up require：
The function of start and restart is excellent, and it will not cause light degradation:

High colour rendering index：
colour rendering index is ≥80, various colours can be chosen from 3500K-6500K

No radiation pollution:
The product passes the national EMC test, it does not create stray radiation pollution.
It matches the international EMI standard EN55015and GB17743-1999 national standard,
it also passes the Europe C.E testing

Easy to install：
It is suitable in any orientation/direction and has strong anti-vibration properties.

The energy saving table
Based on 10 hours per day, and $0.12 per KW, the high pressure mercury ballast itself consumes more than 15% of the power has not been considered.

High Frequency Electrodeless discharge lamp
60,000 hours To Replace  Yearly Saving per Light  Replacement Saving  Co2 emission reduction
Base on Qld
1 KW = 1 Kg CO2 
KW Amount Parts Labour Reduce per Year  Reduce per Light 
BI 125W  250W Metal halide
 465.25 $54.75 3 times  3 times  465.25kg 1395.75kg
BI 165W  400W Mercury Vapor 857.75 $102.93 3 times  3 times  857.75kg 2627.25kg

How does Electrode-less Lamp compare to other lights Lamp Type  LPW Rated Hour  CRI Ignition Time  Color Temp  Major Drawback 
Incandescence 11-15 1.5K - 5K  40 Instant 2800 Very Inefficient, Short Life 
Mercury Vapor  13-48 12K - 24K    2 - 15min  4000 Inefficient
HPS 45-110 12K - 24K  25 2 - 15min  2000 Low CRI 
LPS 80-180 10K - 18K  0 2 - 15min  1800 Low CRI 
Metal Halide  60-100 10K - 15K  75 2 - 15min  3000-4300 High Maintenance 
Induction Lamp  61-76 60K - 100K  82 Instant 2600-6500 Higher Initial Cost. 

  ELECTRODELESS TESTING DATA
Australia in house testing

Electrodeless vs CFL vs Mercury Vapour
Electrodeless (ESL) E165w, 150w VS (CFL) 200w/120w VS Mercury Vapour (MV)400w
* Lamp height fixed 5mtrs above ground test level
* All readings taken at ground level directly under luminaries
( Test conducted at night when high line input V occurs. Generally line V may be 235VAC )

Type of Globe  Identify Globe claim in Watts >  Identify Operating Consumption >  Identify Start up Power Consumption  Identify Actual Lux at ground Level 
MV400 (New)  400W  452W  900W  270
MV400 (Aged)  400W 450W 900W 150
CFL120 (New)  120W 126W 90W 60
CFL200 (New)  200W 175W 130W 90
Electrodeless 150 (New)  150W 148W 130W 199
Electrodeless 165 (New)  165W 165W 126W 275