UV LED curing system:
1. Extra-long guaranteed life: 20000+ hours, provides lower cost of ownership
2. Instant on/off
3. Narrow UV output spectrum
4. Emits no heat- able to cure heat sensitive materials
5. Maximum UV intensity up to 1200mW/ cm2
6. Eco-friendly, mercury and ozone free
7. Small Footprint-Easily embedded into automated manufacturing lines and equipment
8. No serious safety concerns associated with conventional UV curing lamps
9. Five working modes: Constant current, PWM, step, intelligent optical and manual modes, specially designed for eliminating cementing stress of UV adhesives
10. Many kinds of circuit technique designed (patented). The whole system will not be affected by the damage of one LED module.
11. Using thermal Kim Se-performance fan less chassis design, and the LED self-cooling technology is patented.

Specifications:
Two wavelengths of LED available: 365nm, 385-400nm
Length of emitting window: Available in configurable UV emitting lengths from 20mm to 2000mm
Cool method: Air cooled(a mini fan installed) or water cooled
Controller
External Control method: PLC
Foot Pedal: Foot pedal to control start/stop of UV light Emission.
Timer: Adjustable countdown range from 999.9s to 0.1s, in 0.1s intervals or user selectable timing
RS-232C I/O: Change database, illumination auto-calibration
UV output adjustment: From 0 to 100% in 1% step
Key Switch: Key switch to turn on/off controller
Suggestion: The 365nm wavelength UV-LED curing system costs much higher than 385-400nm systems, we suggest you prior consider 385-400nm systems because this wavelength can cure approx. 95% of the UV adhesive as well. If you need 365nm system and the curing area is not large, we suggest combining spot light sources.